Select a category
Our complete range of disinfection systems
EASYZON C
Chlorine dioxide system EASYZON C
The system works according to the acid-chlorite process using commercially available concentrated chemicals. Two dosing pumps with dosing monitoring feed the reactor with chemicals that are diluted directly at the reactor inlet.
In the reactor, good flow control and highly chemically resistant packing ensure the optimum reaction of the chemicals. The product is diluted to the application concentration directly at the reactor outlet in a static mixer.
Properties & advantages
Long-term stable disinfection power
Production directly on site
Cost-effective
compact design
Convenient operation
Integrated monitoring of all functions
Effective disinfection even at high pH values
The system works with concentrated chemicals (NaClO2 25 % and HCl 33 %)
Systems available for direct operation
To enquire this product, please log in here.
EASYZON L/M/H
Chlorine dioxide system EASYZON L/M/H
The EASYZON L/M/H automatically draws and mixes precisely measured quantities of acid and chlorite from the respective chemical containers under vacuum. The chlorine dioxide solution produced is discharged into a product storage tank as a diluted solution under atmospheric pressure with a precisely controlled flow of cold water. The systems from 5 - 40 g/h already have an integrated 8.5 litre product tank. Fresh chlorine dioxide is always automatically replenished by means of level sensors.
The EASYZON L/M/H is a compact system for the on-site production of chlorine dioxide that is characterised by its reliable function and simple operation.
Features & advantages
Safe handling of chemicals that are removed from containers under vacuum
the vacuum process for suctioning the starting chemicals allows significantly longer suction distances compared to conventional dosing pump suction lines
precise control of the chemical volume flows using flow meters to optimise efficiency
the product concentration can be set from 250 - 2000 mg/l ClO2 by measuring the dilution water quantity
is prepared for the connection of up to 3 dosing pumps
Control unit with display of operating parameters
Password-protected user level
Alarm event log with real-time recording
Accurate measurement and data storage of chemical consumption
Telemetry access (optional) via mobile SMS for monitoring and alerting of empty chemical containers
Low costs over the entire service life
To enquire this product, please log in here.
EASYZON 5
Chlorine dioxide system EASYZON 5
The right dose of disinfection
EASYZON 5 is a compact chlorine dioxide system for the on-site production of chlorine dioxide that is characterised by the high product stability of the chlorine dioxide. The concentrated stock solution is produced on site and is still effective after a storage period of 24 hours.
The system uses the acid-chlorite process in batch operation and utilises standard commercial concentrations of hydrochloric acid and sodium chlorite. Peristaltic pumps enable chemicals to be transported safely.
Features & advantages
High product stability
Compact, pre-assembled unit
Integrated monitoring of all functions
several injection points can be supplied from one system
Production directly on site
Long-term stable disinfection power
Disinfection is effective even at high pH values
To enquire this product, please log in here.
EASYZON D
Chlorine dioxide system EASYZON D
Clean water, safely disinfected
With the compact EASYZON D, we offer a chlorine dioxide system for the on-site production of chlorine dioxide that is characterised by its reliable function and simple operation. The system uses commercially available chemicals and carries out processes using the acid-chlorite method. Dosing pumps ensure reliable delivery of the chemicals into the system's pressure-resistant reactor.
Features & benefits
Long-term stable disinfection power
Production directly on site
Cost-effective
compact design
Convenient operation
Integrated monitoring of all functions
Disinfection is effective even at high pH values
Systems available for direct or batch operation
To enquire this product, please log in here.
TECHNOMAT
Flow-through chlorine electrolysis system TECHNOMAT PSFor water disinfection in private swimming pools
The TECHNOMAT provides a medium-sized swimming pool with a high-quality and innovative method of disinfection using electrolysis. The TECHNOMAT disinfects the pool water without the use and storage of hazardous substances such as chlorine gas, chlorine bleach or chlorine tablets. The chlorine required for disinfection is obtained on site from ordinary NaCl salt (table salt, sea salt, sodium chloride) in the pool water - completely safe and with a pleasant side effect: salty water. Salt water has a revitalising effect, is kind to the skin and relaxing at the same time. It promises a quality of life that you can enjoy every day with the flow-through chlorine electrolysis systems from Technopool. The systems work according to the SALT-WATER-LIGHT® process, which has been tried and tested worldwide in private homes, hotel facilities, therapy and exercise pools as well as in municipal and commercial indoor and outdoor swimming pools.
Features & advantages
Compact design, installation in the smallest of spaces
for pool volumes of max. 75 m³
Safety transformer with thermal fuse
Primary and secondary protection through mains fuse and overload protection
Insensitive to current fluctuations
To enquire this product, please log in here.
Your contact person
Contact request