Our products
Our complete vertical centrifugal range
Stainless steel
21 m³/h
Centrifugal submersible pump B6
in the stainless steel version
Description:
High performance, compact dimensions, low weight - the Lutz B6 has it all. The pump shaft is protected by a shaft guide tube against any "attack" from the pumped liquid. Perfectly suited for pumping and emptying neutral and aggressive liquids with low solids content.
Also available in special immersion depths of 1000 - 3000 mm on request
Designed according to the single-pipe principle
Application examples: For pumping and circulating chemicals and solutions in surface treatment, the chemical industry and water treatment, etc.
Features & advantages
Wide range of possible applications
no risk of leakage at the floor drain due to safe product removal
Low wear and tear
Stationary installation possible via flange
also for small container openings
PP
24 m³/h
Centrifugal submersible pump B6
in the polypropylene (PP) version
Description:
High performance, compact dimensions, low weight - the Lutz B6 has it all. The pump shaft is protected by a shaft guide tube against any "attack" from the pumped liquid. Perfectly suited for pumping and emptying neutral and aggressive liquids with low solids content.
Also available in special immersion depths of 1000 - 3000 mm on request
Designed according to the single-pipe principle
Application examples: For pumping and circulating chemicals and solutions in surface treatment, the chemical industry and water treatment, etc.
Features & advantages
Wide range of possible applications
no risk of leakage at the floor drain due to safe product removal
Low wear and tear
Stationary installation possible via flange
also for small container openings
Single-phase motor
Suitable for the B50 pumping station
Description:
The motor is suitable for the rapid transfer of corrosive, aqueous to slightly viscous media. The motor has been designed so that it is not affected by acid vapours or aggressive atmospheres.
Offers maximum chemical resistance
Features & advantages
Light and easy to handle
Smooth running and durable
quick assembly and disassembly
low wear
Stainless steel shaft (1.4571)
Centrifugal submersible pump B50
For neutral and aggressive liquids
Description:
When circulating chemicals and pickling baths, reliability, safety and, last but not least, functionality are essential. The submersible centrifugal pump was specially developed as a vertical, wet-installed pump for the rapid draining of these liquids from tanks and basins.
Available in special immersion depths on request
equipped with self-lubricating, liquid-wetted slide bearings.
Features & advantages
High pumping capacity
quiet running
low space requirement
Simple commissioning
Easy to maintain
high efficiency
Single-phase motor
Suitable for the B50 pumping station
Description:
The motor is suitable for the rapid transfer of corrosive, aqueous to slightly viscous media. The motor has been designed so that it is not affected by acid vapours or aggressive atmospheres.
Offers maximum chemical resistance
Features & benefits
Light and easy to handle
Smooth running and durable
quick assembly and disassembly
low wear
Vertical
80 m³/h
Centrifugal submersible pump B80 KGK G2
For installation depths up to 4000 mm
Description:
The B80 KGK G2 series (with open impeller) is a powerful and robust centrifugal submersible pump with plain bearings, drive lantern with roller bearings and IEC standard motor. The pumped liquid is conveyed from the tank via the radial pump outlet and the vertical riser pipe. Power is transmitted from the motor to the pump by means of a torsionally flexible, positive-locking coupling and is designed for continuous operation.
Equipped with a suction strainer as standard
a suction pipe extension up to 2000 mm is possible
available in immersion depths from 500 - 4000 mm
Features & advantages
No screws in contact with the medium
Vibration and oscillation-free operation
Long service life and operational reliability
Lifetime grease-lubricated roller bearings
Independent bearings for motor and pump
External flushing to protect the plain bearings with media containing solids
Vertical
30 m³/h
Centrifugal submersible pump B80 KGK G1
For installation depths up to 4000 mm
Description:
The B80 KGK G1 series (with closed impeller) is a powerful and robust centrifugal submersible pump with plain bearings, drive lantern with roller bearings and IEC standard motor. The pumped liquid is conveyed from the tank via the radial pump outlet and the vertical riser pipe. Power is transmitted from the motor to the pump by means of a torsionally flexible, positive-locking coupling and is designed for continuous operation applications.
Equipped with a suction strainer as standard
a suction pipe extension up to 2000 mm is possible
available in immersion depths from 500 - 4000 mm
Features & advantages
No screws in contact with the medium
Vibration and oscillation-free operation
Long service life and operational reliability
Lifetime grease-lubricated roller bearings
Independent bearings for motor and pump
external flushing to protect the plain bearings in media containing solids
Vertical
50 m³/h
Centrifugal submersible pump B80 KME
For installation depths up to 1500 mm
Description:
The B80 KME series was developed as a wet-installed centrifugal submersible pump for stationary use in tanks and basins. The direct-coupled, plain bearing pump is suitable for pumping and circulating neutral and chemically aggressive liquids in the chemical industry and process engineering, in electroplating and surface technology, in washing systems and water treatment plants, for sump draining in industrial and municipal waste disposal plants or as a circulation pump in gas scrubbers and heat exchangers.
with various plain bearing designs
available in immersion depths from 600 - 1500 mm
Features & advantages
Compact dimensions
abrasion-resistant material combinations possible
Extremely low-vibration and low-wear operation
All components in contact with the medium are made of corrosion-resistant plastic
Self-centring alignment in the bearing shell
Vertical
50 m³/h
Centrifugal submersible pump B80 HME
For installation depths up to 450 mm
Description:
The B80 HME series is a version with a bearingless cantilever design that is coupled directly to the IEC motor. Specially designed for plant engineering and confined installation conditions. It can be operated in dry installation next to the tank, thus facilitating access for maintenance and repair work. The pump is suitable for pumping and circulating neutral, corrosive and mechanically contaminated liquids. Can also be used for stationary installation in the chemical industry and process engineering, in surface and electroplating technology and in gas scrubbers.
Temporarily also possible in dry operation
Directly coupled in bearingless cantilever design
available in immersion depths from 275 - 450 mm
Features & advantages
Compact dimensions
Service-friendly dry installation
Extremely low-vibration and low-wear operation
Self-centring alignment in the bearing shell
All components in contact with the medium are made of corrosion-resistant plastic
Vertical
270 m³/h
Centrifugal submersible pump B80 KGK G3
For installation depths up to 4000 mm
Description:
The B80 KGK G3 series is a powerful and robust submersible centrifugal pump with plain bearings, drive lantern on roller bearings and IEC standard motor.The B80 KGK G3 series is available in single or two-stage versions with one or two impellers for high delivery rates. Multistage pumps are used to increase the delivery pressure while maintaining compact hydraulic dimensions and are used in particular in processes with high delivery pressures at low flow rates. They are perfectly designed for industrial use in closed, unpressurised tanks, basins or pits.
Equipped with a suction strainer as standard
a suction pipe extension of up to 2000 mm is possible
available in immersion depths from 500 - 4000 mm
Features & advantages
Vibration and oscillation-free operation
Efficient and space-saving design thanks to 1- and 2-stage pump hydraulics
Long service life and operational reliability
All wetted components made of corrosion-resistant plastics
No screws in contact with the medium
external flushing to protect the slide bearings in media containing solids
Your contact person
Lutz Pumpen | Contact
Do you have questions about drum pumps, container emptying, double diaphragm pumps, flow measurement or centrifugal pumps?
Our service team will be happy to assist you. Please send us an enquiry or give us a call.
+49 9342 879 - 260
anfrage@lutz-pumpen.de
Contact request