Eccentric screw pump accessories
Carrying handle
for motor MA II and ME II
Description:
The support bracket makes it easier to lift the pump out of or immerse it in the drums or containers. With an explosion-protected drive motor, the explosion-protection switch is attached to the support bracket
for motor MA II / ME II / B4/GT / three-phase motor / single-phase motor / three-phase motor for reduction gearboxes
Features & advantages
No heavy lifting necessary
Makes it easier to lift out or immerse the motor either with or without pump unit
To enquire this product, please log in here.
Explosion protection
Wechselstrom
CEAG
Ex-plug
for ME II motor and for B70V-SR (Ex)
Description:
The CEE round plugs are suitable for three-phase motors (three-phase current) and electric motors (alternating current) and are used in potentially explosive areas or environments.
Splash-proof
Features & benefits
Certification: EEx de IIC T6
Protection class: IP 65
Rotary (3-pole) or alternating current (5-pole)
To enquire this product, please log in here.
Explosion protection
DN 19 (3/4")
2 m
Solvent hose set (NBR)
for highly flammable hydrocarbons
Description:
The hose set is suitable for a wide range of commercially available solvents. The hose is electrically conductive so that it can also be used in potentially explosive environments. The set is used to connect to the pumping station or dispensing nozzle.
Also available in special lengths on request
Electrically conductive
Features & advantages
Hose connection: 1 1/4" female thread
Nominal diameter: DN 19 (3/4")
Pre-assembled hose connections
Complies with EU regulations 10/2011 and 1935/2004
To enquire this product, please log in here.
Explosion protection
Wechselstrom
CEAG
Ex socket outlet
for ME II motor and for B70V-SR (Ex)
Description:
The CEE socket outlets are suitable for three-phase motors (three-phase current) and electric motors (alternating current) and are used in potentially explosive areas or environments.
Splash-proof
Features & benefits
Certification: EEx de IIC T6
Protection class: IP 65
Rotary (3-pole) or alternating current (5-pole)
To enquire this product, please log in here.
DN 25 (1")
max 5 bar
1 m
PVC spiral hose
For aggressive and non-flammable liquids
Description:
The hose is suitable for aggressive and non-flammable liquids, but also for food liquids. It is made of PVC with an embedded and galvanised steel wire helix (smooth inside and outside).
Also available in special lengths on request
Nominal diameter: DN 19 / DN 25 / DN 32
Properties & advantages
Operating pressure max. 4.5 - 5 bar
Complies with EU Regulation 10/2011 and 1935/2004.
To enquire this product, please log in here.
Explosion protection
Stainless steel (1.4408)
Tri-Clamp reducer
DN 50 to DN 25 / 32 / 40
Description:
The Tri-Clamp reducer is suitable for connecting Tri-Clamp fittings to a spigot.
Made of stainless steel (1.4408)
Features & advantages
Connection of Tri-Clamp fittings DN 25 / 32 / 40
Connection to Tri-Clamp DN 50 connection piece
To enquire this product, please log in here.
Explosion protection
DN 19 (3/4")
FPM
Hose integration
with Tri-Clamp DN 32
Description:
For connecting conductive delivery hoses to the pump, nozzle/outlet elbow or Tri-Clamp fittings in potentially explosive atmospheres. The hose connection ensures a good conductive transition between the conductive hose and pump/fitting. The ohmic resistance between the fittings must be less than106 ohms. The hose connection consists of a hose connector, a clamping shell, a locking clip and a seal.
For progressing cavity pumps
Properties & advantages
Stainless steel materials (1.4404)
Only suitable in conjunction with the universal chemical hose
in accordance with the DIN EN 12 115 standard
To enquire this product, please log in here.
DN 19 (3/4")
2 m
Hose set alkalis + acids
For acidic liquids and low-viscosity chemicals
Description:
The hose set is suitable for aggressive and non-flammable liquids, but also for food liquids. The hose is made of PVC with an embedded and galvanised steel wire helix (smooth inside and outside). The set is used for connection to the pumping station or nozzle.
Also available in special lengths on request
Features & advantages
Nominal diameter DN 19 (3/4")
PP hose connection
Pre-assembled hose connections and hose clamps
To enquire this product, please log in here.
DN 40 (1 1/2")
Seal FPM
Tri-Clamp seal
for progressing cavity pumps
Description:
The Tri-Clamp seals are required for individual requirements, e.g. for connection to on-site Tri-Clamp fittings.
For progressive cavity pumps
Properties & advantages
Material made from FPM / EPDM
For hoses with nominal width DN 32 / DN 40 / DN 50
To enquire this product, please log in here.
Stainless steel (1.4571)
Inline protection
for pumping station B70V 120.1
Description:
The inliner protection is suitable for attachment to the pump foot. It protects sensitive drum inliners and bags from damage.
To enquire this product, please log in here.
DN 32 (1 1/4")
max. 7 bar
1 m
PVC hose, fabric-reinforced
For aggressive and non-flammable liquids
Description:
The hose is suitable for aggressive and non-flammable liquids and is made of fabric-reinforced PVC.
Also available in special lengths on request
Nominal width: DN 32 / DN 38
Properties & advantages
Operating pressure up to max. 6 / 7 bar
To enquire this product, please log in here.
Tri-Clamp connections
Suitable for progressive cavity pump B70V - 120.1
Description:
The Tri-Clamp reducer is suitable for connection to the B70V - 120.1 progressive cavity pumping unit.
Features & advantages
Connection: DN 50 to G 1 1/2" AG
Consisting of Tri-Clamp adapter fitting incl. EPDM seal and Tri-Clamp sealing clamp
To enquire this product, please log in here.
Stainless steel (1.4408)
DN 50
Tri-Clamp locking clamp
for progressive cavity pumps and pumping stations B200 Niro
Description:
The locking clamp is required when using a hose connection with Tri-Clamp DN 32.
for progressive cavity pumps and container pump B200 Niro
Properties & advantages
Material stainless steel (1.4408)
For hoses with nominal width DN 25 / DN 32 / DN 40 / DN 50
in accordance with the DIN 32676 standard
To enquire this product, please log in here.
PP
Barrel adapter
for the eccentric worm-drive pump B70V
Description:
The drum adapter is required to secure the pump in the drum opening. It prevents the pump from tipping over when the drum is empty.
Features & advantages
Material made of PP / St 37
To enquire this product, please log in here.
DN 25 (1")
Tri-Clamp hose connector (1.4404)
DN 32 for hose connection
Description:
The Tri-Clamp hose connector is used for individual requirements, e.g. for connection to on-site Tri-Clamp fittings.
For progressive cavity pumps
Properties & advantages
Material stainless steel (1.4404)
For hoses with nominal width DN 19 / DN 25 / DN 32 / DN 38
in accordance with the DIN 32676 standard
To enquire this product, please log in here.
Explosion protection
DN 25 (1")
max. 16 bar
Special chemical hose PTFE
for common and high-purity media
Description:
The hose is suitable for all common media, but also for high-purity products. It can be used either as a pressure or suction hose and complies with FDA and USP Class VI requirements. The hose is electrically conductive so that it can also be used in potentially explosive environments.
Also available in special lengths on request
Nominal diameter: DN 19 / DN 25
Properties & advantages
Operating pressure up to max. 16 bar
Colour coding: "blue/white/red"
Complies with EU regulations 10/2011 and 1935/2004
To enquire this product, please log in here.
DN 25 (1")
Clamping shells
DN 32 for hose connection
Description:
The clamping shells are required for individual needs, e.g. for connection to on-site Tri-Clamp fittings.
For progressive cavity pumps
Properties & advantages
Made of stainless steel (1.4408)
For hoses with nominal width DN 19 / DN 25 / DN 32 / DN 38 / DN 50
To enquire this product, please log in here.
Stainless steel
DN 32
Rd 58 x 1/6
Tri-Clamp adapter fitting
for Tri-Clamp sockets
Description:
The "Tri-Clamp" adapter fitting is used to connect Tri-Clamp spigots to round threads in accordance with DIN11851.
for B70 SanitaryPlus and B70 PURE
Features & advantages
Stainless steel material
Nominal sizes with DN 32 / DN 50
Round thread with 58 x 1/6 and 78 x 1/6
To enquire this product, please log in here.
DN 25 (1")
1 m
PVC spiral hose
fabric-reinforced
Description:
The hose is suitable for aggressive, non-flammable liquids. The hose is made of PVC with a fabric insert and an embedded galvanised steel wire helix. Perfect for conveying food liquids.
Also available in special lengths on request
Nominal width: DN 19 / DN 25 / DN 32 / DN 38 / DN 50
Features & advantages
Operating temperature max. 14 bar
Complies with EU regulations 10/2011 and 1935/2004
To enquire this product, please log in here.
PP
DN 50 x 2" internal thread
Hose connection
for DMP 2" and B70-V
Description:
The hose connection connects the delivery hoses to the pressure/suction nozzles of the double diaphragm pumps or the dispensing nozzle. When using a double diaphragm pump, either a suitable reducing nipple or a threaded bottle must be used in addition to the hose connection.
Special connections are available on request
Properties & advantages
Materials PP / PVDF / stainless steel
Connections: DN 38 x 1 1/2" female thread / DN 50 x 2" female thread
To enquire this product, please log in here.
Stainless steel (1.4404)
DN 25 (1")
Tri-Clamp hose connector (1.4404)
DN 25 for hose connection
Description:
The Tri-Clamp hose connector is required for individual requirements, e.g. for connection to on-site Tri-Clamp fittings.
For progressive cavity pumps
Properties & advantages
Material stainless steel (1.4404)
For hoses with nominal width DN 19 / DN 25 / DN 32 / DN 38 / DN 50
To enquire this product, please log in here.
DN 9 (3/8")
Hose clamps
for hose size DN 9
Description:
The hose clamp is made of stainless steel and is suitable for attaching the various delivery hoses to the hose connection.
Nominal sizes: DN 9 / DN 13 / DN 19 / DN 25 / DN 32 - 38 / DN 50
To enquire this product, please log in here.
DN 19 (3/4")
Dichtung FPM
Tri-Clamp hose connection
DN 19
Description:
The hose connection with Tri-Clamp is required for connecting the delivery hose to the pump, dispensing nozzle, discharge elbow or Tri-Clamp fittings (consisting of hose nozzle, locking clamp and seal).
For progressive cavity, drum or double diaphragm pumps (pure stainless steel)
Properties & advantages
Material: stainless steel (1.4404)
For hoses with nominal diameters DN 19 / DN 25 / DN 32 / DN 38
To enquire this product, please log in here.
Food
Ex-Schutz
DN 25 (1")
Special chemical hose FEP
for high-purity products
Description:
The hose is suitable for all common media, but also for high-purity products. It can be used either as a pressure or suction hose and complies with FDA and USP Class VI requirements.
Also available in special lengths on request
Nominal width: DN 19 / DN 25 / DN 32 / DN 38 / DN 50
Features & advantages
Operating pressure up to max. 16 bar
Colour coding: "blue/white/red"
Vacuum max. 0.9 bar
To enquire this product, please log in here.