Vacuum regulator C 2214
*Illustration may differ from the actual product
The C 2214 is designed for individual operation. For use on gas drums, a heated droplet separator is optionally available on the pressure side in the inlet valve of the C 2214. A safety blow-off valve is integrated and prevents an impermissible increase in pressure in the downstream vacuum line system. The quantity of gas dosed can be optimally adjusted on the C 2214 using a dosing valve and flow meter.
Features & advantages
- Throughput capacity with chlorine gas: up to 4 kg/h
- Residual pressure protection: Prevents the chlorine cylinder from being completely evacuated to prevent corrosion caused by moisture in the air
- Filter: To protect the valve from dirt particles from the chlorine cylinder or the connection area
- Cylinder pressure gauge: For displaying the pressure in the chlorine tank
- Integrated safety blow-off valve
- Flow meter with manual setting
- Gas filter
- Compact design
- Available with all standard gas connections
| MATCHCODE: | 0204V11N1N0500L1A |
|---|---|
| Funktionen:: | Der Vakuumregler dient zur Reduzierung des Gasdrucks vom |
| Typ:: | C 2214 |
| Eingang:: | Überwurfmutter BSW 1" - DIN 477 |
| Dosieranschluss:: | Schlauchklemm-Anschluss 8/12 |
| Abblase-Anschluss:: | Schlauchklemm-Anschluss 8/12 |
| Durchflussmesser:: | 25 - 500 g/h |
| Manometer:: | 0 - 16 bar[g] |
| Medium:: | Chlorgas |
| Restdrucksicherung:: | 0,1 bar |
| Funktion-2: | Überdruck der Gasbehälter auf Unterdruck [Vakuum]. |
| Funktion-3: | Bei Wegfall des Betriebsvakuums schließt das Einlassventil und |
| Funktion-4: | verhindert den Durchfluss. |
| Funktion-5: | Geeignet für trockenes Chlorgas [Reinheit > 99,5%]. |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter