Tri-Clamp seal
Product number:
0314-599
Product information "Tri-Clamp seal"
Description:
The Tri-Clamp seals are required for individual requirements, e.g. for connection to on-site Tri-Clamp fittings.
- For progressive cavity pumps
Properties & advantages
- Material made from FPM / EPDM
- For hoses with nominal width DN 32 / DN 40 / DN 50
| Accessories group: | Hose connection / Hose clips |
|---|---|
| Certification: | 3-A Sanitary Standard, FDA-compliant |
| Product group: | Fasspumpen / Containerpumpen |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter