Tri-Clamp hose connector (1.4404)
Product number:
0370-094
Product information "Tri-Clamp hose connector (1.4404)"
Description:
The Tri-Clamp hose connector is used for individual requirements, e.g. for connection to on-site Tri-Clamp fittings.
- For progressive cavity pumps
Properties & advantages
- Material stainless steel (1.4404)
- For hoses with nominal width DN 19 / DN 25 / DN 32 / DN 38
- in accordance with the DIN 32676 standard
| Accessories group: | Hose connection / Hose clips |
|---|
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter