TOPAX
*Illustration may differ from the actual product
Your versatile partner in measurement and control technologyWith
its modular design, the multi-channel controller proves to be an adaptable and extremely competent companion for various measurement and control tasks. The modularity of the multi-channel controller makes it possible to record a wide range of measurement parameters such as chlorine, pH value, redox value or even quadruple pH value measurements in any conceivable combination,
and the outputs are also freely selectable. Dosing pumps can be controlled via optocouplers or relays, as well as actuators via relays or a 20 mA output.
The colour display with a very high resolution shows a user-friendly user interface. The user-friendliness is rounded off by simple touch operation and multilingual, intuitive menu navigation.
Free digital outputs can be configured as required. Regardless of whether they are to switch in the event of low sample water, measured value overflow, measured value underflow or other possible alarm triggers: There are no limits to the configuration.
You can use the four analogue outputs (0/4 - 20 mA) or the network capability to forward measured values to a web browser or a remote control station. An adjustable time interval can be used, for example, to automatically remind you to replace sensors due to wear and tear, and
data such as measured values, settings and alarm messages can be easily saved to a USB stick via a USB interface.
Core functions of the multi-channel controller at a glance:
- Modular design of the inputs and outputs
- Up to four sensors and up to four additional temperature sensors
- Freely configurable overviews
- Differential value measurement (e.g. ∆pH)
- Graphic display of the setpoint deviation
- Up to four setpoint sets can be configured and loaded via digital input or timer control
- Service entries and sensor changes can be saved
- Limit value control (can be used as DIN contact for partial load operation in accordance with DIN 19643)
- 1 - 9 potential-free relay outputs
- Web server and Modbus protocol via Ethernet
- Trend display
- Large colour touch display
- Data storage on a USB stick
| MATCHCODE: | 0406WB4G1C1P1R1DUUC0A0A00LG |
|---|---|
| Funktionen:: | Modularer Aufbau der 8 Ein- und Ausgangsmodule |
| Produkt:: | Regler |
| Typ:: | Wandaufbaugerät |
| Anzahl freigeschalteter Eingänge:: | 4 |
| Display:: | 7 Zoll |
| Eingang Steckplatz 1:: | Gesamtchlor, Membranbedeckte Messzelle, 0-2 mg/l, max. 1 bar |
| Eingang Steckplatz 2:: | Freies Chlor, DMZ3.1, 0-15 mg/l, bis 6 bar |
| Eingang Steckplatz 3:: | pH-Wert |
| Eingang Steckplatz 4:: | Redox |
| Elektrischer Anschluss:: | ohne, Klemme vorhanden |
| Ausgang Steckplatz 1:: | Stellantrieb Relais mit Rückmeldung |
| Ausgang Steckplatz 2:: | Digital Universell [Opto/ Relais] |
| Betriebsspannung:: | 100 bis 240 V AC, 50/60 Hz |
| Funktion-2: | Frei konfigurierbare Übersichten |
| Funktion-3: | Differenzwertmessung [z. B. Delta pH] |
| Funktion-4: | Graphische Anzeige der Sollwertabweichung |
| Funktion-5: | Sollwertsätze konfigurierbar |
| Funktion-6: | Serviceeinträge und Sensorwechsel speicherbar |
| Funktion-7: | Grenzwertkontrolle: DIN-Kontakt für Teillastbetrieb DIN 19643 |
| Funktion-8: | 4 Analogausgänge 0/4-20 mA [max. Bürde 500 Ohm] |
| Funktion-9: | Webserver und Modbus TCP/IP über Ethernet |
| Funktion-10: | Regelcharakteristik: P-, PI-, PID-, PD-Verhalten, 2-Seitenregelung |
| Funktion-11: | Störgrößeneingang: 0/4-20 mA |
| Funktion-12: | min. 5 Jahre Datenspeicherung auf USB-Stick [500 MB] |
| Funktion-13: | Trendanzeige |
| Funktion-14: | Dosiermengenanzeige |
| Funktion-15: | Schutzgrad: IP65 |
| Funktion-16: | Abmessungen: 302x240x107 mm |
| Funktion-17: | Leistungsaufnahme: max. 20 W |
| Ausgang Steckplatz 3:: | Digital Universell [Opto/ Relais] |
| Ausgang Steckplatz 4:: | Stellantrieb 20mA mit Rückmeldung oder 0/4-20 mA |
| Datenübertragung (drahtgebunden):: | Ethernet + RS485 |
| Temperaturmessung (PT100):: | ohne |
| Datenübertragung (drahtlos):: | nicht bestückt |
| Sprachen:: | EN, DE, FR, ES, PT, RU, HU, DK, NL, CZ weitere auf Anfrage |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter