Special chemical hose FEP
*Illustration may differ from the actual product
Description:
The hose is suitable for all common media, but also for high-purity products. It can be used either as a pressure or suction hose and complies with FDA and USP Class VI requirements.
- Also available in special lengths on request
- Nominal width: DN 19 / DN 25 / DN 32 / DN 38 / DN 50
Features & advantages
- Operating pressure up to max. 16 bar
- Colour coding: "blue/white/red"
- Vacuum max. 0.9 bar
| Accessories group: | Hoses / Discharge spouts / Suction pipe |
|---|---|
| Certification: | ATEX Richtlinie (ATEX Richtlinie 2014/34/EU), FDA-compliant |
| Product group: | Exzenterschneckenpumpen, Fasspumpen / Containerpumpen, Membranpumpen |
| Pumped liquid temperature (max °C): | 100 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Accessory Items
To enquire this product, please log in here.
To enquire this product, please log in here.
Accessory Items
To enquire this product, please log in here.
To enquire this product, please log in here.