Slow valve connection cable
*Illustration may differ from the actual product
Description:
The connection cable is used for direct connection between the RM10 relay module and the slow valve.
- Special lengths are available on request
Features & advantages
- Cable length: 5 m
- Voltage: 230 V
- Frequency: 50 Hz
| Accessories group: | Cable / Plugs / Sockets / Switch |
|---|---|
| Product group: | Durchflussmesser |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter