Reducing nipple (on the product side)
PP
1/2" AG x 1 1/4" AG
*Illustration may differ from the actual product
Product number:
5000-060
Product information "Reducing nipple (on the product side)"
Description:
The reducing nipple enables the connection of two different threaded sockets.
- Special connections are available on request
Properties & advantages
- Materials: PP / PVC / PVDF / stainless steel (1.4571) / brass
- Connection 1/2" AG to 1 1/4" AG
- Connection 1/2" AG to 1" AG
- Connection 1/2" AG to 3/4" AG
| Product group: | Membranpumpen |
|---|
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter