PVDF pumping station
HC Wave
Rotor
*Illustration may differ from the actual product
Product number:
0122-200
Product information "PVDF pumping station"
Description:
The Lutz pumping station (PVDF) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various motors are available that you can combine with the pumping station at any time. This gives you flexibility at all times and conserves important resources.
- Also available in special immersion depths from 200 - 2500 mm
- Pumping unit equipped with Lutz original handwheel
Features & advantages
- Optionally with electric or compressed air drive
- No lubricants and therefore no contamination of the pumped liquid by lubricants
- Optimised drum emptying
- Universally resistant PTFE shaft bearing
- Maintenance without special tools
- Seal modules of the mechanical seal-sealed (GLRD) or seal-less (DL) pump are interchangeable
| Bearing (material): | ETFE / PTFE |
|---|---|
| Conveyor wheel (material): | ETFE (ethylene-tetrafluorethylene copolymer) |
| Conveyor wheel shape / drive type: | Axial-flow rotor |
| Delivery head (up to max. mWS)*: | 12 |
| Delivery rate (up to max. l/min)*: | 170 |
| Density (up to kg/dm³): | 1.4 |
| Drive shaft (material): | Hastelloy C (2.4610) |
| Immersion depth (mm): | from 500 mm |
| Immersion tube diameter (max. mm): | 41 |
| Mechanical seal (material): | no seals in contact with the medium |
| Pumped liquid temperature (max °C): | 100 |
| Pumping unit material (material): | PVDF (polyvinylidene fluoride) |
| Seal type: | Sealless (SL) |
| Static seal (material): | no seals in contact with the medium |
| Thread (inch) external: | 1 1/4" |
| Type: | PVDF 41-R-DL |
| Viscosity (up to max. mPas)*: | 350 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Accessory Items
HC Wave
Rotor
TR3 flow meter (PVDF)
for concentrated acids and alkalis
Description:
Easy to operate, compact design and quick to install on all drum and container pumps: The Lutz TR3 flow meter in PP or PVDF. A handy meter that you can "count on" in any situation. The symmetrical measuring chamber can be used for all flow directions and measures low-viscosity, non-flammable media precisely, quickly and, above all, efficiently.
PVDF for highly aggressive liquids
Examples of media: Chlorine bleach, nitric acid, sulphuric acid, ...
Two 1.5 V batteries (AAA) replaceable
Features & advantages
Measurement according to the turbine wheel principle
Displays the partial and total quantity
Variable display orientation
Mobile on a drum pump or with nozzle connection
Measuring range from 5 l/min - 120 l/min
Simple battery change
HC Wave
Rotor
Dispensing nozzle PVDF
for concentrated acids and alkalis
Description:
For filling and decanting concentrated acids and alkalis. The housing and the valve plug of the dispensing nozzle are made of polyvinylidene fluoride (PVDF) and are equipped with a protective bracket and two outlet nozzles(Ø 23 mm and Ø 12mm). The dispensing nozzle is sealed with an FPM seal.
FFPM or FEP / FPM seals are available at extra cost on request
Connection: external thread G 1 1/4"
Optionally available as a variant with a push-button for direct operation of the relay module (no communication module required)
Features & benefits
Simple adjustment of the volume flow
Easy to operate
Safe filling and Decanting the respective liquid
HC Wave
Rotor
Universal chemical hose
for concentrated acids and alkalis
Description:
The hose is suitable for pure chemicals, cosmetics, photographic chemicals, paints and adhesives, detergents and cleaning agents, hygiene products, as well as food and luxury foods. It is FDA and USP Class VI compliant and is electrically conductive so that it can also be used in potentially explosive environments.
Also available in special lengths on request
Nominal width: DN 13 / DN 19 / DN 25 / DN 32 / DN 38 / DN 50
Features & advantages
Operating pressure up to max. 16 bar
Colour coding: "blue/white/blue".
Complies with EU regulations 10/2011 and 1935/2004
Underpressure max 0.9 bar
HC Wave
Rotor
Barrel adapter
for concentrated acids and alkalis
Description:
The drum adapter is for fastening the pump or pump unit in the drum opening. It prevents the pump from tipping over when the drum is empty.
Materials: PP / ST37 / steel, galvanised / PE
Features & advantages
Stabilisation of the pumping unit
External thread 2", 56 x 4 and 70 x6
HC Wave
Rotor
Suspension device
for concentrated acids and alkalis
Description:
The suspension device is used to store the drum pumps and prevents them from falling over.
For pumping stations with handwheel
Features & advantages
Protects against falling over
Increases the utility value
HC Wave
Rotor
Hose set for concentrated alkalis and acids
for concentrated acids and alkalis
Description:
The hose set is for concentrated alkalis + acids. The set is FDA and USP Class VI compliant. The set is used to connect to the pumping station or the dispensing nozzle.
Also available in special lengths on request
Suitable for filling or decanting chemicals, foodstuffs and hygiene products
Features & advantages
Nominal diameter DN 19 (3/4")
PVDF hose connection
Pre-assembled hose connections and hose clamps
HC Wave
Rotor
Foot strainer
for concentrated acids and alkalis
Description:
The foot strainer can be used for PP, PVDF, aluminium and stainless steel pumping units. By attaching the strainer to the pump foot, coarse impurities can be kept away from important components such as the drive (rotor, impeller).
For attaching to the pump base and the suction pipe with Ø 41 mm
Features & advantages
Prevents contamination in the pumping station by filtering it out
Outer pipe diameter 55 mm
Mesh size 20 x 2 mm
HC Wave
Rotor
Hose connection
for concentrated acids and alkalis
Description:
The hose connection connects the delivery hoses to the pumping station, the double diaphragm pumps or the dispensing nozzle. When using a double diaphragm pump, a suitable reducing nipple must be used in addition to the hose connection
Special connections are available on request
Features & advantages
Nominal sizes: DN 13 / DN 19 / DN 25 / DN 32
Materials PP / PVDF / aluminium / stainless steel / HC
HC Wave
Rotor
Outlet bend
for concentrated acids and alkalis
Description:
The discharge elbow enables the direct transfer or filling of liquids into another container. They are available in PP, aluminium and stainless steel and are screwed onto the pump outlet.
Nominal sizes: DN 19 / DN 25
Features & advantages
Enables liquids to be transferred quickly and directly
Union nut (1 1/4")
HC Wave
Rotor
IBC traverse
for concentrated acids and alkalis
Description:
The IBC lifting beam is used to safely remove and install the pumping units or the double diaphragm pump.
Suitable for drum pumps, B70 progressive cavity pumps and diaphragm pumps
Includes transport straps for lifting vehicles and tensioning hooks for fixing to the container
Features & advantages
Compatible with all standard IBC containers
Material: stainless steel
Clamping hook: galvanised steel
for drum pumps / B70 version, guide sleeve with Ø 55 mm made of plastic
Accessory Items
HC Wave
Rotor
PVDF pumping station
for concentrated acids and alkalis
Description:
The Lutz pumping station (PVDF) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various motors are available that you can combine with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz original handwheel
Features & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped liquid by lubricants
Optimised drum emptying
Universally resistant PTFE shaft bearing
Maintenance without special tools
Seal modules of the mechanical seal-sealed (GLRD) or seal-less (DL) pump are interchangeable