PVDF pumping station
*Illustration may differ from the actual product
Available, delivery time: 4 days
Description:
The Lutz pumping station (PVDF) is suitable for low-viscosity, concentrated acids and alkalis. With the appropriate motor, it is suitable for medium to large filling volumes. Depending on the requirements, the pumping station can be operated with the B2 Vario electric motor or the B2 Battery version.
- Examples of media: Chloric acid, chromic acid, sulphuric acid. Nitric acid, hydrofluoric acid, etc.
- for removing small quantities from hobbocks, canisters and drums
- suitable for motor B2 Vario and B2 Battery
Features & advantages
- No lubricants and therefore no contamination of the pumped liquid
- Optimised drum emptying
- Maintenance without special tools
- Universally resistant shaft bearing made of ETFE/PTFE
- Sealless design (DL) conditionally dry-running safe
| Conveyor wheel (material): | PVDF (polyvinylidene fluoride) |
|---|---|
| Conveyor wheel shape / drive type: | Axial-flow rotor |
| Delivery head (up to max. mWS)*: | 8 |
| Delivery rate (up to max. l/min)*: | 80 |
| Density (up to kg/dm³): | 1.6 |
| Drive shaft (material): | Hastelloy C (2.4610) |
| Fördermenge mit Zapfpistole (bis max. l/min)*: | 45 |
| Gewinde (Zoll) außen: | 1" |
| Immersion depth (mm): | from 500 mm, from 1000 mm, from 1500 mm, up to 500 mm |
| Mechanical seal (material): | no seals in contact with the medium |
| Pumped liquid temperature (max °C): | 90 |
| Pumping unit material (material): | PVDF (polyvinylidene fluoride) |
| Seal type: | Sealless (SL) |
| Static seal (material): | no seals in contact with the medium |
| Tauchrohrdurchmesser (max. mm): | 32 |
| Typ: | PVDF 32-R-DL |
| Viscosity (up to max. mPas)*: | 400 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Accessory Items
To enquire this product, please log in here.
To enquire this product, please log in here.
To enquire this product, please log in here.
To enquire this product, please log in here.
To enquire this product, please log in here.
To enquire this product, please log in here.