PVC spiral hose
Description:
The hose is suitable for aggressive and non-flammable liquids, but also for food liquids. It is made of PVC with an embedded and galvanised steel wire helix (smooth inside and outside).
- Also available in special lengths on request
- Nominal diameter: DN 19 / DN 25 / DN 32
Properties & advantages
- Operating pressure max. 4.5 - 5 bar
- Complies with EU Regulation 10/2011 and 1935/2004.
Accessories group: | Hoses / Discharge spouts / Suction pipe |
---|---|
Certification: | Verordnung (EG) 1935/2004 |
Product group: | Exzenterschneckenpumpen, Fasspumpen / Containerpumpen |
Pumped liquid temperature (max °C): | 65 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter