PVC hose / compressed air hose
*Illustration may differ from the actual product
Description:
The compressed air hose is used to supply air to the air motors or diaphragm pumps, but can also be used as a vapour recovery hose (DN 9) for the vapour recovery system for mobile operation.
- Also available in special lengths on request
- Nominal widths: DN 9 / DN 13
Properties & advantages
- PVC hose with fabric insert
- Operating pressure (nominal width DN 9) max. 14 bar
- Operating pressure (nominal width DN 13) max. 10 bar
| Accessories group: | Hoses / Discharge spouts / Suction pipe |
|---|---|
| Product group: | Fasspumpen / Containerpumpen |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter