Pumping station PP
HC Wave
Laufrad
*Illustration may differ from the actual product
Available, delivery time: 4 days
Product number:
0110-204
Product information "Pumping station PP"
Description:
The Lutz pumping station (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various motors are available that you can combine with the pumping station at any time. This gives you flexibility at all times and saves important resources.
- Also available in special immersion depths from 200 - 2500 mm
- Pumping unit equipped with Lutz Original handwheel
- Suitable for filling or decanting oils such as rapeseed oil and vegetable oil
Features & advantages
- Optionally with electric or compressed air drive
- No lubricants and therefore no contamination of the pumped medium by lubricants
- Optimised drum emptying
- Universally resistant PTFE shaft bearing
- Maintenance without special tools
- Sealing modules of the mechanical seal (GLRD) or of the sealless (DL) pump interchangeable
| Bearing (material): | ETFE / PTFE |
|---|---|
| Conveyor wheel (material): | PP (polypropylene) |
| Conveyor wheel shape / drive type: | Radial-flow impeller |
| Delivery head (up to max. mWS)*: | 25 |
| Delivery rate (up to max. l/min)*: | 95 |
| Density (up to kg/dm³): | 1.9 |
| Drive shaft (material): | Hastelloy C (2.4610) |
| Gewinde (Zoll) außen: | 1 1/4" |
| Immersion depth (mm): | from 500 mm, from 1000 mm, from 1500 mm |
| Mechanical seal (material): | Carbon, SiC, FPM, HC-4 (2.4610), no seals in contact with the medium |
| Pumped liquid temperature (max °C): | 50 |
| Pumping unit material (material): | PP (polypropylene) |
| Seal type: | Sealless (SL), mechanical seal (MS) |
| Static seal (material): | FPM (fluororubber), no seals in contact with the medium |
| Tauchrohrdurchmesser (max. mm): | 41 |
| Typ: | PP 41-L-DL HC, PP 41-L-GLRD HC |
| Viscosity (up to max. mPas)*: | 800 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Accessory Items
HC Wave
Laufrad
Pumping station PP
for low-viscosity acids
Description:
The Lutz pumping station (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various motors are available that you can combine with the pumping station at any time. This gives you flexibility at all times and conserves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz Original handwheel
Suitable for filling or decanting oils such as rapeseed oil and vegetable oil
Features & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Optimised drum emptying
Universally resistant PTFE shaft bearing
Maintenance without special tools
Sealing modules of the mechanical seal (GLRD) or of the sealless (DL) pump interchangeable
To enquire this product, please log in here.
HC Wave
Laufrad
Pumping station PP
for low-viscosity acids
Description:
The Lutz pumping station (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various motors are available that you can combine with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz Original handwheel
Suitable for filling or decanting oils such as rapeseed oil and vegetable oil
Features & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Optimised drum emptying
Universally resistant PTFE shaft bearing
Maintenance without special tools
Sealing modules of the mechanical seal (GLRD) or of the sealless (DL) pump interchangeable
To enquire this product, please log in here.
HC Wave
Laufrad
Pumping station PP
for low-viscosity acids
Description:
The Lutz pumping station (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various motors are available that you can combine with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz Original handwheel
Suitable for filling or decanting oils such as rapeseed oil and vegetable oil
Features & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Optimised drum emptying
Universally resistant PTFE shaft bearing
Maintenance without special tools
Sealing modules of the mechanical seal (GLRD) or of the sealless (DL) pump interchangeable
To enquire this product, please log in here.
Accessory Items
HC Wave
Laufrad
Hose connection
for low-viscosity acids
Description:
The hose connection connects the delivery hoses to the pumping station, the double diaphragm pumps or the dispensing nozzle. When using a double diaphragm pump, a suitable reducing nipple must be used in addition to the hose connection
Special connections are available on request
Features & advantages
Nominal sizes: DN 13 / DN 19 / DN 25 / DN 32
Materials PP / PVDF / aluminium / stainless steel / HC
To enquire this product, please log in here.
HC Wave
Laufrad
Outlet bend
for low-viscosity acids
Description:
The discharge elbow enables the direct transfer or filling of liquids into another container. They are available in PP, aluminium and stainless steel and are screwed onto the pump outlet.
Nominal sizes: DN 19 / DN 25
Features & advantages
Enables liquids to be transferred quickly and directly
Union nut (1 1/4")
To enquire this product, please log in here.
HC Wave
Laufrad
IBC traverse
for low-viscosity acids
Description:
The IBC lifting beam is used to safely remove and install the pumping units or the double diaphragm pump.
Suitable for drum pumps, B70 progressive cavity pumps and diaphragm pumps
Includes transport straps for lifting vehicles and tensioning hooks for fixing to the container
Features & advantages
Compatible with all standard IBC containers
Material: stainless steel
Clamping hook: galvanised steel
for drum pumps / B70 version, guide sleeve with Ø 55 mm made of plastic
To enquire this product, please log in here.
HC Wave
Laufrad
Hose set alkalis + acids
for low-viscosity acids
Description:
The hose set is suitable for aggressive and non-flammable liquids, but also for food liquids. The hose is made of PVC with an embedded and galvanised steel wire helix (smooth inside and outside). The set is used for connection to the pumping station or nozzle.
Also available in special lengths on request
Features & advantages
Nominal diameter DN 19 (3/4")
PP hose connection
Pre-assembled hose connections and hose clamps
To enquire this product, please log in here.
HC Wave
Laufrad
TR3 flow meter (PP)
for low-viscosity acids
Description:
Easy to operate, compact design and quick to install on all drum and container pumps: The Lutz TR3 flow meter in PP or PVDF. A handy meter that you can "count on" in any situation. The symmetrical measuring chamber can be used for all flow directions and measures low-viscosity, non-flammable media precisely, quickly and, above all, efficiently.
PP for neutral and aggressive media
Examples of media: glycol, ferric chloride, hydrochloric acid, phosphoric acid, etc.
Two 1.5 V batteries (AAA) replaceable
Features & advantages
Measurement according to the turbine wheel principle
Displays the partial and total quantity
Variable display orientation
Mobile on a drum pump or with nozzle connection
Measuring range from 5 l/min - 120 l/min
Simple battery change
To enquire this product, please log in here.
HC Wave
Laufrad
Dispensing nozzle PP
for low-viscosity acids
Description:
For filling and decanting neutral and aggressive liquids. The body and the valve plug of the dispensing nozzle are made of polypropylene (PP) and are equipped with a protective bracket and two outlet nozzles ( Ø 23 mm and Ø 12mm).
Connection: external thread G 1 1/4"
Features & advantages
Simple adjustment of the volume flow
Safe filling or decanting of the respective liquid
Easy to operate
To enquire this product, please log in here.
HC Wave
Laufrad
PVC hose, fabric-reinforced
for low-viscosity acids
Description:
The hose is suitable for aggressive and non-flammable liquids and is made of fabric-reinforced PVC.
Also available in special lengths on request
Nominal width: DN 32 / DN 38
Properties & advantages
Operating pressure up to max. 6 / 7 bar
To enquire this product, please log in here.
HC Wave
Laufrad
Barrel adapter
for low-viscosity acids
Description:
The drum adapter is for fastening the pump or pump unit in the drum opening. It prevents the pump from tipping over when the drum is empty.
Materials: PP / ST37 / steel, galvanised / PE
Features & advantages
Stabilisation of the pumping unit
External thread 2", 56 x 4 and 70 x6
To enquire this product, please log in here.
HC Wave
Laufrad
Suspension device
for low-viscosity acids
Description:
The suspension device is used to store the drum pumps and prevents them from falling over.
For pumping stations with handwheel
Features & advantages
Protects against falling over
Increases the utility value
To enquire this product, please log in here.
HC Wave
Laufrad
PVC spiral hose
for low-viscosity acids
Description:
The hose is suitable for aggressive and non-flammable liquids, but also for food liquids. It is made of PVC with an embedded and galvanised steel wire helix (smooth inside and outside).
Also available in special lengths on request
Nominal diameter: DN 19 / DN 25 / DN 32
Properties & advantages
Operating pressure max. 4.5 - 5 bar
fulfils EU Regulation 10/2011 and 1935/2004.
To enquire this product, please log in here.
HC Wave
Laufrad
Foot strainer
for low-viscosity acids
Description:
The foot strainer can be used for PP, PVDF, aluminium and stainless steel pumping units. By attaching the strainer to the pump foot, coarse impurities can be kept away from important components such as the drive (rotor, impeller).
For attaching to the pump base and the suction pipe with Ø 41 mm
Features & advantages
Prevents contamination in the pumping station by filtering it out
Outer pipe diameter 55 mm
Mesh size 20 x 2 mm
To enquire this product, please log in here.