Pumping station PP
PP
Impeller
*Illustration may differ from the actual product
Available, delivery time: 4 days
Product number:
0102-570
Product information "Pumping station PP"
Description:
The Lutz pumping unit (PP) is suitable for low-viscosity, oil-based lubricants, cold cleaners and plasticisers. With the appropriate motor, it is suitable for medium to large filling quantities. Depending on requirements, the pumping station can be operated with the B2 Vario electric motor or the B2 Battery version.
- Examples of media: Lubricants (oil-based), cold cleaners, plasticisers
- For dispensing small quantities from hobbocks, canisters and drums
- Suitable for motor B2 Vario and B2 Battery
Features & advantages
- No lubricants and therefore no contamination of the pumped medium
- Optimised drum emptying
- Maintenance without special tools
- Universally resistant shaft bearing made of ETFE/PTFE
- Sealless design (DL) conditionally dry-running safe
| Bearing (material): | ETFE / PTFE |
|---|---|
| Conveyor wheel (material): | PP (polypropylene) |
| Conveyor wheel shape / drive type: | Radial-flow impeller |
| Delivery head (up to max. mWS)*: | 12 |
| Delivery rate (up to max. l/min)*: | 65 |
| Density (up to kg/dm³): | 1.6 |
| Drive shaft (material): | Hastelloy C (2.4610) |
| Immersion depth (mm): | up to 500 mm |
| Immersion tube diameter (max. mm): | 32 |
| Mechanical seal (material): | no seals in contact with the medium |
| Pumped liquid temperature (max °C): | 50 |
| Pumping unit material (material): | PP (polypropylene) |
| Seal type: | Sealless (SL) |
| Static seal (material): | no seals in contact with the medium |
| Thread (inch) external: | 1" |
| Type: | PP 32-L-DL |
| Viscosity (up to max. mPas)*: | 400 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Accessory Items
PP
Impeller
Pumping station PP
Suitable for B2 Vario and B2 Battery
Description:
The Lutz pumping unit (PP) is suitable for low-viscosity, oil-based lubricants, cold cleaners and plasticisers. With the appropriate motor, it is suitable for medium to large filling quantities. Depending on requirements, the pumping station can be operated with the B2 Vario electric motor or the B2 Battery version.
Examples of media: Lubricants (oil-based), cold cleaners, plasticisers
For dispensing small quantities from hobbocks, canisters and drums
Suitable for motor B2 Vario and B2 Battery
Features & advantages
No lubricants and therefore no contamination of the pumped medium
Optimised drum emptying
Maintenance without special tools
Universally resistant shaft bearing made of ETFE/PTFE
Sealless design (DL) conditionally dry-running safe
Accessory Items
PP
Impeller
TR3 flow meter (PP)
Suitable for B2 Vario and B2 Battery
Description:
Easy to operate, compact design and quick to install on all drum and container pumps: The Lutz TR3 flow meter in PP or PVDF. A handy meter that you can "count on" in any situation. The symmetrical measuring chamber can be used for all flow directions and measures low-viscosity, non-flammable media precisely, quickly and, above all, efficiently.
PP for neutral and aggressive media
Examples of media: glycol, ferric chloride, hydrochloric acid, phosphoric acid, etc.
Two 1.5 V batteries (AAA) replaceable
Features & advantages
Measurement according to the turbine wheel principle
Displays the partial and total quantity
Variable display orientation
Mobile on a drum pump or with nozzle connection
Measuring range from 5 l/min - 120 l/min
Simple battery change
PP
Impeller
Emission protection barrel adapter PP
Suitable for B2 Vario and B2 Battery
Description:
Prevents hazardous gases from escaping from the drum when using a drum pump. This protects the operator, the environment and the drive motor from hazardous gases. Two venting valves ensure pressure equalisation between the inside of the drum and the surrounding atmosphere.
Seal: FPM
Features & benefits
Protection against escaping gases
Screw-in thread: G 2" AG
Connection for vapour return line: G 3/8"
PP
Impeller
Foot strainer PP
Suitable for B2 Vario and B2 Battery
Description:
For attaching to the pump foot. This keeps coarse impurities away from the rotating parts so that wear and tear on the pump can be reduced.
Is placed on the pump base
Features & benefits
Protects important parts from contamination
Reduces wear and tear on the pump
PP
Impeller
Hose connection
Suitable for B2 Vario and B2 Battery
Description:
The hose connection connects the delivery hoses to the pumping station, the double diaphragm pumps or the dispensing nozzle. When using a double diaphragm pump, a suitable reducing nipple must be used in addition to the hose connection
Special connections are available on request
Features & advantages
Nominal sizes: DN 13 / DN 19 / DN 25 / DN 32
Materials PP / PVDF / aluminium / stainless steel / HC
PP
Impeller
IBC traverse
Suitable for B2 Vario and B2 Battery
Description:
The IBC lifting beam is used to safely remove and install the pumping units or the double diaphragm pump.
Suitable for drum pumps, B70 progressive cavity pumps and diaphragm pumps
Includes transport straps for lifting vehicles and tensioning hooks for fixing to the container
Features & advantages
Compatible with all standard IBC containers
Material: stainless steel
Clamping hook: galvanised steel
for drum pumps / B70 version, guide sleeve with Ø 55 mm made of plastic
PP
Impeller
Lutz tap valve PP
Suitable for B2 Vario and B2 Battery
Description:
For filling and decanting neutral and aggressive liquids. The liquid flow can be easily adjusted using a screw cap. The body of the dispensing valve is made of polypropylene (PP) and has a suspension bracket. The valve is sealed using an FPM seal.
The outlet spout has a diameter of 12 mm
Features & advantages
Connection: hose nozzle DN 19 (3/4")
Simple adjustment of the flow rate
Dispensing valve made of polypropylene (PP)
PP
Impeller
Suspension device
Suitable for B2 Vario and B2 Battery
Description:
The suspension device is used to safely store the B2 Vario drum and laboratory pump. This protects the pumps and increases their utility value at the same time.
Precisely adapted to the B2 Vario drum pump
Features & advantages
Increases the utility value
Protection against the pumping unit or drum pump falling down
PP
Impeller
Barrel adapter PP
Suitable for B2 Vario and B2 Battery
Description:
The drum adapter stabilises the pumping unit or pump in the drum or container opening and prevents the pump from tipping over when the drum is empty.
Detailed information on the various container openings is available on request
for the B2 pumping unit
Features & advantages
Stabilisation of the drum pump
Protection against the pumping unit falling out
PP
Impeller
PVC spiral hose
Suitable for B2 Vario and B2 Battery
Description:
The hose is suitable for aggressive and non-flammable liquids, but also for food liquids. It is made of PVC with an embedded and galvanised steel wire helix (smooth inside and outside).
Also available in special lengths on request
Nominal diameter: DN 19 / DN 25 / DN 32
Properties & advantages
Operating pressure max. 4.5 - 5 bar
fulfils EU Regulation 10/2011 and 1935/2004.