Pumping station HC
Explosion protection
Laufrad
*Illustration may differ from the actual product
Available, delivery time: 4 days
Product number:
0162-204
Product information "Pumping station HC"
Description:
The Lutz pumping station (HC) is suitable for low-viscosity, flammable and highly corrosive chemicals. Depending on the application, various motors are available which can be combined with the pumping station at any time. This gives you flexibility at all times and saves important resources.
- Also available in special immersion depths from 200 - 2500 mm
- Pumping unit equipped with Lutz original handwheel
- Used in the areas of fire and disaster control
Features & advantages
- Optionally with electric or compressed air drive
- No lubricants and therefore no contamination of the pumped medium by lubricants
- Approved in accordance with ATEX Directive 2014/34/EU, category 1/2
- Highly resistant carbon and ETFE shaft bearings
- Maintenance without special tools
- Sealing modules of the sealless (DL) pump can be replaced
| Bearing (material): | ETFE / carbon |
|---|---|
| Certification: | ATEX Richtlinie (ATEX Richtlinie 2014/34/EU) |
| Conveyor wheel (material): | ETFE (ethylene-tetrafluorethylene copolymer) |
| Conveyor wheel shape / drive type: | Radial-flow impeller |
| Delivery head (up to max. mWS)*: | 26 |
| Delivery rate (up to max. l/min)*: | 123 |
| Density (up to kg/dm³): | 1.9 |
| Drive shaft (material): | Hastelloy C (2.4610) |
| Explosion protection: | Yes |
| Immersion depth (mm): | from 1000 mm |
| Immersion tube diameter (max. mm): | 42 |
| Pumped liquid temperature (max °C): | 120 |
| Pumping unit material (material): | HC (Hastelloy C) |
| Seal type: | Sealless (SL) |
| Static seal (material): | FPM (fluororubber) |
| Thread (inch) external: | 1 1/4" |
| Type: | HC 42-L-DL |
| Viscosity (up to max. mPas)*: | 750 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Accessory Items
Explosion protection
Laufrad
Flow meter TS type UN10 Ex
for flammable chemicals
Description:
The first flow meter with touchscreen display and backlighting impresses with its simple, needs-based display and operability, multilingual interface and compact design. Thanks to the rotating swash plate and a magnet, it enables precise measurement of the volume flow and measures solvents, acids, alkalis, highly flammable liquids, oils and neutral media precisely, quickly and, above all, efficiently. Optionally, the desired quantity can be preselected with the quantity preselection (relay module) so that the pump or system switches off automatically after the selected quantity. This further simplifies and secures the operation of the systems.
Optionally with volume preselection (relay module)
Media examples: Methanol, petrol, isopropanol, paraffin, formic acid, acetic acid, acetone, styrene, xylene, toluene, etc.
Mobile on a drum pump or with nozzle connection or stationary in plant construction
Features & advantages
Measurement according to the wobble disc principle
High measuring accuracy
Variable display orientation
Touchscreen display with self-explanatory, multilingual user interface
Measuring range from 10 l/min- 100 l/min
approved according to ATEX directive 2014/34/EU, category 2
Explosion protection
Laufrad
Brass petrol nozzle
for flammable chemicals
Description:
For dispensing and transferring solvents and neutral liquids. The housing and the valve plug of the dispensing nozzle are made of brass and are equipped with a swivel coupling and a protective bracket.The dispensing nozzle is sealed with a PTFE seal.
Connection: external thread G 1 1/4"
Features & advantages
Safe filling or decanting of the respective liquid
Easy to operate
Swivel coupling ensures tightness at high pressure
For pumping in potentially explosive environments
Explosion protection
Laufrad
Hose connection
for flammable chemicals
Description:
The hose connection connects the delivery hoses to the pumping station, the double diaphragm pumps or the dispensing nozzle. When using a double diaphragm pump, a suitable reducing nipple must be used in addition to the hose connection
Special connections are available on request
Features & advantages
Nominal sizes: DN 13 / DN 19 / DN 25 / DN 32
Materials PP / PVDF / aluminium / stainless steel / HC
Explosion protection
Laufrad
Solvent hose
for flammable chemicals
Description:
The hose is suitable for a wide range of commercially available solvents. The hose is electrically conductive so that it can also be used in potentially explosive environments.
Also available in special lengths on request
Nominal width: DN 13 / DN 19 / DN 25 / DN 32 / DN 38 / DN 50
Electrically conductive
Features & advantages
Operating pressure up to max. 16 bar
Colour coding: blue
fulfils EU regulations 10/2011 and 1935/2004
Underpressure max 0.9 bar
Explosion protection
Laufrad
Potential equalisation cable
for flammable chemicals
Description:
The potential equalisation cable is used for the electrically conductive connection between the explosion-protected pump and the container and has the function of earthing and potential equalisation.
2 m with fastening clip
Features & advantages
Earthing and potential equalisation function
Explosion protection
Laufrad
Flow meter TS type LM10 Ex
for flammable chemicals
Description:
The first flow meter with touchscreen display and backlighting impresses with its simple, needs-based display and operability, multilingual interface and compact design. Thanks to the rotating swash plate and a magnet, it enables precise measurement of the volume flow and measures solvents and highly flammable liquids, oils and neutral media precisely, quickly and, above all, efficiently. Optionally, the desired volume can be preselected with the volume preselection (relay module) so that the pump or system switches off automatically after the selected volume. This further simplifies and secures the operation of the systems.
Optionally with volume preselection (relay module)
Media examples: Methanol, petrol, isopropanol, paraffin, formic acid, acetic acid, acetone, styrene, xylene, toluene, etc.
Mobile on a drum pump or with nozzle connection or stationary in plant construction
Features & advantages
Measurement according to the wobble disc principle
High measuring accuracy
Variable display orientation
Touchscreen display with self-explanatory, multilingual user interface
Measuring range from 10 l/min- 100 l/min
approved according to ATEX directive 2014/34/EU, category 2
Explosion protection
Laufrad
Flow meter TS type VA10 Ex
for flammable chemicals
Description:
The first flow meter with touchscreen display and backlighting impresses with its simple, needs-based display and operability, multilingual interface and compact design. Thanks to the rotating swash plate and a magnet, it enables precise measurement of the volume flow and measures solvents, acids, alkalis, highly flammable liquids, oils and neutral media precisely, quickly and, above all, efficiently. Optionally, the desired quantity can be preselected with the quantity preselection (relay module) so that the pump or system switches off automatically after the selected quantity. This further simplifies and secures the operation of the systems.
Optionally with volume preselection (relay module)
Media examples: Methanol, petrol, isopropanol, paraffin, formic acid, acetic acid, acetone, styrene, xylene, toluene, etc.
Mobile on a drum pump or with nozzle connection or stationary in plant construction
Features & advantages
Measurement according to the wobble disc principle
High measuring accuracy
Variable display orientation
Touchscreen display with self-explanatory, multilingual user interface
Measuring range from 10 l/min- 100 l/min
approved according to ATEX directive 2014/34/EU, category 2
Explosion protection
Laufrad
Dispensing nozzle Niro
for flammable chemicals
Description:
For filling and transferring liquids in the food and pharmaceutical industries as well as flammable and highly flammable liquids. The body and valve plug of the dispensing nozzle are made of stainless steel (1.4571) and are equipped with a protective bracket and a swivel coupling.
EPDM seal available on request at an extra charge
Connection: external thread G 1 1/4"
Features & advantages
For pumping in potentially explosive environments
Simple adjustment of the volume flow
Easy to operate
Safe filling or transferring of the respective liquid
Rotary coupling ensures tightness at high pressure
Explosion protection
Laufrad
Universal chemical hose
for flammable chemicals
Description:
The hose is suitable for pure chemicals, cosmetics, photographic chemicals, paints and adhesives, detergents and cleaning agents, hygiene products, as well as food and luxury foods. It is FDA and USP Class VI compliant and is electrically conductive so that it can also be used in potentially explosive environments.
Also available in special lengths on request
Nominal width: DN 13 / DN 19 / DN 25 / DN 32 / DN 38 / DN 50
Features & advantages
Operating pressure up to max. 16 bar
Colour coding: "blue/white/blue".
Complies with EU regulations 10/2011 and 1935/2004
Underpressure max 0.9 bar
Explosion protection
Laufrad
Hose integration
for flammable chemicals
Description:
The hose connection ensures a good conductive transition between the hose and the pumping station. The use of conductive hoses is mandatory in potentially explosive atmospheres. The ohmic resistance between the fittings must be less than106 ohms.
For drum and container pumps
Properties & advantages
Made of stainless steel (1.4571)
For mineral oil hoses DN 19 / DN 25 / DN 32
Explosion protection
Laufrad
IBC traverse
for flammable chemicals
Description:
The IBC lifting beam is used to safely remove and install the pumping units or the double diaphragm pump.
Suitable for drum pumps, B70 progressive cavity pumps and diaphragm pumps
Includes transport straps for lifting vehicles and tensioning hooks for fixing to the container
Features & advantages
Compatible with all standard IBC containers
Material: stainless steel
Clamping hook: galvanised steel
for drum pumps / B70 version, guide sleeve with Ø 55 mm made of plastic
Accessory Items
Explosion protection
Laufrad
Pumping station HC
for flammable chemicals
Description:
The Lutz pumping station (HC) is suitable for low-viscosity, flammable and highly corrosive chemicals. Depending on the application, various motors are available which can be combined with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz original handwheel
Used in the areas of fire and disaster control
Features & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Approved in accordance with ATEX Directive 2014/34/EU, category 1/2
Highly resistant carbon and ETFE shaft bearings
Maintenance without special tools
Sealing modules of the sealless (DL) pump can be replaced