Pump station vertical container pump B50
Description:
The container pump is suitable for the rapid transfer of corrosive, aqueous to slightly viscous media. Perfectly suited for the removal or transfer of chemical liquids.
- Examples of media: battery acid, iron sulphate, glycols, phosphoric acid, hydrochloric acid, citric acid, etc.
- Pumping unit equipped with Lutz original handwheel
- For filling or decanting IBC containers
Features & advantages
- Adjustable container adapter for standard container openings
- High pumping capacity
- Optimised container emptying
- Low wear
- Variable adaptation to different container openings
- quick and easy to dismantle due to few components
Conveyor wheel (material): | PPO (Polyphenylenoxid) / PPE (Polyphenylenether) |
---|---|
Conveyor wheel shape / drive type: | Radial-flow impeller |
Delivery head (up to max. mWS)*: | 22 |
Delivery rate (up to max. l/min)*: | 200 |
Density (up to kg/dm³): | 1.8 |
Drive shaft (material): | Edelstahl (1.4571) |
Gewinde (Zoll) außen: | 1 1/2" |
Immersion depth (mm): | 1100 |
Mechanical seal (material): | Kohle, SiC, HC-4 (2.4610) |
Pumped liquid temperature (max °C): | 40 |
Pumping unit material (material): | PP (polypropylene) |
Static seal (material): | FPM (fluororubber) |
Tauchrohrdurchmesser (max. mm): | 100 |
Typ: | B50 PP/ SS |
Viscosity (up to max. mPas)*: | 100 (e.g. milk) |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter