Pump set - Food
*Illustration may differ from the actual product
Available, delivery time: 2-5 days
Description:
The electric pump set is suitable for low-viscosity, aqueous to slightly viscous media in the food & pharmaceutical sector and is perfect for dispensing or decanting food.
- Pumping unit equipped with Lutz Original handwheel
Features & advantages
- Optionally with electric or compressed air drive
- Lubricant-free: therefore no contamination of the pumped medium
- Facilitated and accelerated emptying processes
- Universally resistant ETFE shaft bearing
- Easy disassembly: maintenance without special tools
- Sealing modules of the sealless (DL) pump can be replaced
| Bearing (material): | ETFE |
|---|---|
| Certification: | FDA-compliant |
| Connection: | Tri-Clamp |
| Conveyor wheel (material): | ETFE (ethylene-tetrafluorethylene copolymer) |
| Conveyor wheel shape / drive type: | Radial-flow impeller |
| Delivery head (up to max. mWS)*: | 19 |
| Delivery rate (up to max. l/min)*: | 117 |
| Delivery rate with nozzle (up to max. l/min)*: | 50 |
| Density (up to kg/dm³): | 1.4 |
| Drive shaft (material): | Stainless steel (1.4571) |
| Drive type: | Electric |
| Frequency (Hz): | 50 |
| Hose length (mm): | 2000 |
| Immersion depth (mm): | from 1000 mm |
| Immersion tube diameter (max. mm): | 41 |
| Mechanical seal (material): | no seals in contact with the medium |
| Power (W): | 500 |
| Protection class: | IP24 |
| Pumped liquid temperature (max °C): | 100 |
| Pumping unit material (material): | Niro (Edelstahl) |
| Seal type: | Sealless (SL) |
| Static seal (material): | no seals in contact with the medium |
| Thread (inch) external: | 1 1/4" |
| Tri-Clamp connection (DN): | 32 |
| Viscosity (up to max. mPas)*: | 500 |
| Voltage (V): | 230 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Similar Items
