Pump set B200 PVDF
*Illustration may differ from the actual product
Available, delivery time: 4 days
Description:
The horizontal pump set is suitable for emptying highly aggressive, aqueous to slightly viscous media from IBC containers or tanks and is the perfect alternative to the vertical drum pumps.
Perfectly suited for emptying concentrated acids and alkalis.
- Optionally with leakage detection (safety box)
- Horizontal connection at the bottom of the container
Features & advantages
- Optionally with electric or compressed air drive
- Low loss of medium when disconnected
- Simple installation
- Easy to dismantle
- Small space requirement
- Automatic emergency stop function of the motor when leakage is detected
| Ausführung/Ausstattung: | ohne Leckageerkennung |
|---|---|
| Bearing (material): | ETFE / PTFE |
| Conveyor wheel (material): | ETFE (ethylene-tetrafluorethylene copolymer) |
| Conveyor wheel shape / drive type: | Axial-flow rotor |
| Delivery head (up to max. mWS)*: | 16 |
| Delivery rate (up to max. l/min)*: | 216 |
| Density (up to kg/dm³): | 2.8 |
| Drive shaft (material): | Hastelloy C (2.4610) |
| Hose length (mm): | 2000 |
| Mechanical seal (material): | Carbon, SiC, FPM, HC-4 (2.4610) |
| Pumped liquid temperature (max °C): | 100 |
| Pumping unit material (material): | PVDF (polyvinylidene fluoride) |
| Seal type: | mechanical seal (MS) |
| Static seal (material): | FPM (fluororubber) |
| Suitable media: | Bromsäure, Dimethylphthalat, Fluorwasserstoffsäure, Kaliumbromat, Nitric acid, Schwefelsäure |
| Viscosity (up to max. mPas)*: | 1000 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Accessory Items
To enquire this product, please log in here.