Pump set - B2 Vario Niro
*Illustration may differ from the actual product
Available, delivery time: 4 days
Description:
The B2 Vario pump set is suitable for low-viscosity, aqueous to slightly viscous media. The set is suitable for dispensing small containers such as canisters, hobbocks and drums. The pump is flexible at all times and thus conserves important resources.
- Infinitely variable speed controller for transferring and filling small quantities
Features & advantages
- Sealless design (DL) conditionally dry-running safe
- Infinitely variable
- Powerful motor with improved service life
- Easy to service and dismantle
| Bearing (material): | ETFE / PTFE |
|---|---|
| Conveyor wheel (material): | ETFE (ethylene-tetrafluorethylene copolymer) |
| Conveyor wheel shape / drive type: | Axial-flow rotor |
| Delivery head (up to max. mWS)*: | 6,7 |
| Delivery rate (up to max. l/min)*: | 66 |
| Density (up to kg/dm³): | 1.3 |
| Drive shaft (material): | Edelstahl (1.4571) |
| Drive type: | Electric |
| Frequency (Hz): | 50 |
| Fördermenge mit Zapfpistole (bis max. l/min)*: | 22 |
| Gewinde (Zoll) außen: | 1" |
| Hose length (mm): | 1500 |
| Immersion depth (mm): | from 500 mm, from 1000 mm, from 1500 mm, up to 500 mm |
| Mechanical seal (material): | no seals in contact with the medium |
| Power (W): | 200 |
| Protection class: | IP24 |
| Pumped liquid temperature (max °C): | 90 |
| Pumping unit material (material): | Niro (Edelstahl) |
| Seal type: | Sealless (SL) |
| Static seal (material): | no seals in contact with the medium |
| Suitable media: | Kaltreiniger, Schmiermittel, Weichmacher |
| Tauchrohrdurchmesser (max. mm): | 32 |
| Viscosity (up to max. mPas)*: | 300 |
| Voltage (V): | 230 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Accessory Items
To enquire this product, please log in here.