Pulsation damper
*Illustration may differ from the actual product
Description:
The pulsation dampers are containers filled with a gas cushion. A diaphragm separates the gas cushion from the system fluid. Pulsation dampers store and discharge part of the stroke volume in the stroke rhythm of the double diaphragm pump, whereby the gas cushion is compressed or decompressed accordingly. This makes the pulsating flow rate of the pump almost uniform.
- Automatic air control / adjustable air control (FPM version)
- Materials: PE / PTFE / stainless steel
Features & advantages
- Max. operating pressure 8 bar / 10 bar (FPM version)
- ensure almost uniform volume flow, which increases the accuracy of flow meters
- Compensation of pressure surges (water hammer) protects installed fittings
- Prevents pipe vibrations that cause material fatigue and pipe breakages
| Accessories group: | Pulsation dampener and vibration dampener |
|---|---|
| Certification: | ATEX Richtlinie (ATEX Richtlinie 2014/34/EU) |
| Connection medium inside (inch) : | 1", 3/4" |
| External air connection (inch) : | 1/4" |
| Internal air connection (inch): | 1/4" |
| Operating pressure (max. bar): | from 6 bar, from 8 bar |
| Product group: | Membranpumpen |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter