Progressing cavity pump unit B70V-D in PURE design
Food
Seal FPM
*Illustration may differ from the actual product
Delivery time 2-3 weeks (approx. 10-15 working days)
Product number:
0172-004 + 0172-128
Product information "Progressing cavity pump unit B70V-D in PURE design"
Description:
The progressive cavity pump B70V-D in PURE design is a powerful positive displacement pump for medium, high viscosity and viscous media up to the limits of flowability. Depending on the application, various three-phase motors are available, which can be combined with the pumping unit at any time. This gives you flexibility at all times and saves important resources.
- Also available in special immersion depths
- Examples of media: viscous cosmetic products, food, etc.
Features & advantages
- Uniform volume flow
- Quick and easy cleaning
- Gentle, low-pulsation product conveying
- Smooth running and low wear
- Large selection of robust and powerful drive motors
- Approved in accordance with ATEX Directive 2014/34/EU, category 1/2
| Certification: | FDA-compliant, Verordnung (EG) 1935/2004 |
|---|---|
| Connection: | Tri-Clamp |
| Conveyor wheel shape / drive type: | Torsion shaft (medium viscosity media) |
| Delivery head (up to max. bar)*: | 6 |
| Delivery rate (up to max. l/min)*: | 12 |
| Drive shaft (material): | Stainless steel (1.4571) |
| Explosion protection: | No |
| Immersion depth (mm): | from 1000 mm |
| Immersion tube diameter (max. mm): | 54 |
| Mechanical seal (material): | WC, SiC, FPM |
| Pressure connection (DN): | 50 |
| Pumped liquid temperature (max °C): | 140 |
| Pumping unit material (material): | Stainless steel (1.4571/1.4404) |
| Rotor (material): | Stainless steel (1.4571) |
| Seal type: | mechanical seal (MS) |
| Static seal (material): | FPM (fluororubber) |
| Stator (material): | PTFE (polytetrafluoroethylene) |
| Stator size: | 12.1 |
| Type: | B70V Pure |
| Viscosity (up to max. mPas)*: | 100000 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Accessory Items
Food
Seal FPM
Hose connection
for three-phase motors up to 400 volts
Description:
The hose connection with Tri-Clamp is required to connect the delivery hose to the B70 progressive cavity pump, the discharge elbow or the Tri-Clamp fittings (consisting of hose nozzle, locking clamp and seal).
For progressing cavity pumps
Properties & advantages
Material stainless steel (1.4404)
For hoses with nominal diameter DN 38 / DN 50
Food
Seal FPM
Potential equalisation cable
for three-phase motors up to 400 volts
Description:
The potential equalisation cable is used for the electrically conductive connection between the explosion-protected pump and the container and has the function of earthing and potential equalisation.
2 m with fastening clip
Features & advantages
Earthing and potential equalisation function
Food
Seal FPM
Outlet bend
for three-phase motors up to 400 volts
Description:
The outlet elbow enables the direct transfer or filling of liquids into another container by mounting it on the pump outlet.
Made of stainless steel (1.4571, 1.4404)
Nominal diameter: DN 50
Features & advantages
Enables quick and direct transfer of liquids
EPDM seal
incl. seal and clamp
Food
Seal FPM
Balancer
for three-phase motors up to 400 volts
Description:
The balancer makes it easier to insert and move the pump in the container and has an infinitely variable load adjustment. It is equipped with a special fall protection in the event of a spring breakage and offers maximum safety for long-term applications.
For drum pumps and progressing cavity pumps
Features & advantages
Load capacity from 10 - 30 kg
Cable pull up to 2 m
Food
Seal FPM
Suspension device
for three-phase motors up to 400 volts
Description:
The suspension device is used to safely store the B70 pumps. This protects the pumps and increases their utility value at the same time.
Precisely adapted to the B70V progressive cavity pumps
Features & advantages
Increases the utility value
Protection against the progressing cavity pump falling down
Food
Seal FPM
Hub, motor side
for three-phase motors up to 400 volts
Description:
If the motor is provided by the customer, the hub must also be ordered in accordance with the shaft diameter.
Material made of aluminium
Features & advantages
Shaft diameter: Ø 14 mm / Ø 19 mm / Ø 24 mm / Ø 28 mm
Food
Seal FPM
Hose integration
for three-phase motors up to 400 volts
Description:
For connecting conductive delivery hoses to the pump, nozzle/outlet elbow or Tri-Clamp fittings in potentially explosive atmospheres. The hose connection ensures a good conductive transition between the conductive hose and pump/fitting. The ohmic resistance between the fittings must be less than106 ohms. The hose connection consists of a hose connector, a clamping shell, a locking clip and a seal.
For progressing cavity pumps
Properties & advantages
Stainless steel materials (1.4404)
Only suitable in conjunction with the universal chemical hose
in accordance with the DIN EN 12 115 standard
Food
Seal FPM
Tri-Clamp locking clamp
for three-phase motors up to 400 volts
Description:
The Tri-Clamp locking clamp is suitable for connecting Tri-Clamp fittings to a spigot.
Made of stainless steel (1.4408)
Features & advantages
Connection of Tri-Clamp DN 50 fittings
Connection to Tri-Clamp DN 50 connection piece
incl. seal
Food
Seal FPM
Tri-Clamp reducer
for three-phase motors up to 400 volts
Description:
The Tri-Clamp reducer is suitable for connecting Tri-Clamp fittings to a spigot.
Made of stainless steel (1.4408)
Features & advantages
Connection of Tri-Clamp fittings DN 25 / 32 / 40
Connection to Tri-Clamp DN 50 connection piece
Food
Seal FPM
Mounting flange
for three-phase motors up to 400 volts
Description:
The installation flange is attached to the B70V pump and a counter flange. The flange is welded directly to the pump unit.
Material: Stainless steel (1.4571)
Features & advantages
DN 80 / PN 10
according to the standard: DIN 2576
Pumping unit diameter Ø 52-54 mm
Food
Seal FPM
Clamping device
for three-phase motors up to 400 volts
Description:
The clamping device is for fastening the B70V progressive cavity pump in open and thick-walled drums and containers.
Suitable for a wide range of pumping station diameters
Features & advantages
Made of stainless steel