Progressing cavity pump B70H Industrial
*Illustration may differ from the actual product
Description:
The B70H is a modification of our B70V and is designed for horizontal use on a transport trolley. It can be used in situations where the B70V reaches its spatial or handling limits and thus rounds off our range of progressing cavity pumps with a mobile version. The pump is suitable for pumping aqueous to highly viscous Newtonian and non-Newtonian media as well as media containing solids and shear-sensitive media. However, it is also used in explosion-protected zones for aggressive and highly flammable liquids with high delivery pressure.
- Also available in explosion-proof design on request
- Horizontal version
- with stainless steel transport trolley
Features & advantages
- Conveying possible at low room heights
- No physical strain due to heavy lifting
- Mobility is provided by the transport trolley
- Simple resizing possible
- Easy handling of heavy pumps
| Conveyor wheel shape / drive type: | Gelenkwelle (hochviskose Medien) |
|---|---|
| Delivery head (up to max. bar)*: | 8 |
| Delivery rate (up to max. l/min)*: | 25, 75 |
| Drive shaft (material): | Edelstahl (1.4571) |
| Druckstutzen (DN): | 50 |
| Immersion depth (mm): | 400 , up to 500 mm |
| Mechanical seal (material): | Kohle, CrMO-Guss, FPM |
| Power (kW): | 1,5 |
| Protection class: | IP55 |
| Pumped liquid temperature (max °C): | 140 |
| Pumping unit material (material): | Edelstahl (1.4571/1.4404) |
| Rotor (Werkstoff): | Edelstahl (1.4571) |
| Seal type: | mechanical seal (MS) |
| Speed (1/min): | 900 |
| Static seal (material): | FPM (fluororubber) |
| Stator (material): | PTFE (Polytetrafluorethylen) |
| Stator size: | 25.1, 75.1 |
| Typ: | B70H |
| Viscosity (up to max. mPas)*: | 100000 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter