PP pumping station for residual emptying
*Illustration may differ from the actual product
Available, delivery time: 4 days
Description:
The Lutz pumping station (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various motors are available that you can combine with the pumping station at any time. This gives you flexibility at all times and saves important resources.
- Also available in special immersion depths from 200 - 2500 mm
- Pumping unit equipped with Lutz Original handwheel
- Suitable for emptying drums of oils such as rapeseed oil and vegetable oil
Features & advantages
- Optionally with electric or compressed air drive
- No lubricants and therefore no contamination of the pumped liquid by lubricants
- optimised drum emptying with a residual quantity of approx. 0.1 litre
- No leaks if the pumping station is tilted or moved
- Maximum product utilisation with reduced barrel cleaning and disposal costs
- Sealing module of the mechanical seal pump (GLRD) can be replaced
| Bearing (material): | Edelkohle |
|---|---|
| Conveyor wheel (material): | PP (polypropylene) |
| Conveyor wheel shape / drive type: | Radial-flow impeller |
| Delivery head (up to max. mWS)*: | 15 |
| Delivery rate (up to max. l/min)*: | 69 |
| Density (up to kg/dm³): | 2.0 |
| Drive shaft (material): | Hastelloy C (2.4610) |
| Gewinde (Zoll) außen: | 1 1/4" |
| Immersion depth (mm): | from 500 mm, from 1000 mm, from 1500 mm |
| Mechanical seal (material): | Kohle, Keramik, FPM, HC-4 (2.4610) |
| Pumped liquid temperature (max °C): | 50 |
| Pumping unit material (material): | PP (polypropylene) |
| Seal type: | mechanical seal (MS) |
| Static seal (material): | FPM (fluororubber) |
| Tauchrohrdurchmesser (max. mm): | 50 |
| Typ: | RE PP 41-L GLRD HC |
| Viscosity (up to max. mPas)*: | 1000 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Accessory Items
To enquire this product, please log in here.
Accessory Items
To enquire this product, please log in here.
To enquire this product, please log in here.
To enquire this product, please log in here.
To enquire this product, please log in here.
To enquire this product, please log in here.
To enquire this product, please log in here.
To enquire this product, please log in here.