PP pumping station for mixing and pumping
Stainless steel shaft
Impeller
*Illustration may differ from the actual product
Available, delivery time: 4 days
Product number:
0110-350
Product information "PP pumping station for mixing and pumping"
Description:
The drum pump is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various motors are available which can be combined with the pumping unit at any time. This gives you flexibility at all times and saves important resources.
- Also available in special immersion depths from 200 - 2500 mm
- Pumping unit equipped with Lutz original handwheel
- Suitable for mixing and pumping oils such as rapeseed oil and vegetable oil
Features & advantages
- Optionally with electric or compressed air drive
- No lubricants and therefore no contamination of the pumped medium by lubricants
- Two functions (pumping and mixing) in one device
- No leaks if the pumping unit is tilted or moved
- High mixing and conveying capacity for thorough homogenisation
- switching between the pumping and mixing functions takes place without interrupting ongoing operation, which is made possible by a small lever on the handwheel
| Bearing (material): | ETFE / PTFE |
|---|---|
| Conveyor wheel (material): | PP (polypropylene) |
| Conveyor wheel shape / drive type: | Radial-flow impeller |
| Delivery head (up to max. mWS)*: | 25 |
| Delivery rate (up to max. l/min)*: | 95 |
| Density (up to kg/dm³): | 1.9 |
| Drive shaft (material): | Edelstahl (1.4571) |
| Gewinde (Zoll) außen: | 1 1/4" |
| Immersion depth (mm): | from 1000 mm |
| Mechanical seal (material): | Carbon, SiC, FPM, HC-4 (2.4610) |
| Pumped liquid temperature (max °C): | 50 |
| Pumping unit material (material): | PP (polypropylene) |
| Seal type: | mechanical seal (MS) |
| Static seal (material): | FPM (fluororubber) |
| Tauchrohrdurchmesser (max. mm): | 50 |
| Typ: | MP PP 50/41-L-GLRD |
| Viscosity (up to max. mPas)*: | 800 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Accessory Items
Stainless steel shaft
Impeller
PP pumping station for mixing and pumping
for low-viscosity alkaline solutions
Description:
The Lutz pumping station (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various motors are available which can be combined with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz original handwheel
Suitable for mixing and pumping oils such as rapeseed oil and vegetable oil
Features & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Two functions (pumping and mixing) in one device
No leaks if the pumping unit is tilted or moved
High mixing and conveying capacity for thorough homogenisation
switching between the pumping and mixing functions takes place without interrupting ongoing operation, which is made possible by a small lever on the handwheel
To enquire this product, please log in here.
Stainless steel shaft
Impeller
PP pumping station for mixing and pumping
for low-viscosity alkaline solutions
Description:
The Lutz pumping station (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various motors are available which can be combined with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz original handwheel
Suitable for mixing and pumping oils such as rapeseed oil and vegetable oil
Features & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Two functions (pumping and mixing) in one device
No leaks if the pumping unit is tilted or moved
High mixing and conveying capacity for thorough homogenisation
switching between the pumping and mixing functions takes place without interrupting ongoing operation, which is made possible by a small lever on the handwheel
To enquire this product, please log in here.
Stainless steel shaft
Impeller
PP pumping station for mixing and pumping
for low-viscosity alkaline solutions
Description:
The Lutz pumping station (PP) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various motors are available which can be combined with the pumping station at any time. This gives you flexibility at all times and saves important resources.
Also available in special immersion depths from 200 - 2500 mm
Pumping unit equipped with Lutz original handwheel
Suitable for mixing and pumping oils such as rapeseed oil and vegetable oil
Features & advantages
Optionally with electric or compressed air drive
No lubricants and therefore no contamination of the pumped medium by lubricants
Two functions (pumping and mixing) in one device
No leaks if the pumping unit is tilted or moved
High mixing and conveying capacity for thorough homogenisation
switching between the pumping and mixing functions takes place without interrupting ongoing operation, which is made possible by a small lever on the handwheel
To enquire this product, please log in here.
Accessory Items
Stainless steel shaft
Impeller
Hose connection
for low-viscosity alkaline solutions
Description:
The hose connection connects the delivery hoses to the pumping station, the double diaphragm pumps or the dispensing nozzle. When using a double diaphragm pump, a suitable reducing nipple must be used in addition to the hose connection
Special connections are available on request
Features & advantages
Nominal sizes: DN 13 / DN 19 / DN 25 / DN 32
Materials PP / PVDF / aluminium / stainless steel / HC
To enquire this product, please log in here.
Stainless steel shaft
Impeller
Barrel adapter
for low-viscosity alkaline solutions
Description:
The drum adapter is for fastening the pump or pump unit in the drum opening. It prevents the pump from tipping over when the drum is empty.
Materials: PP / ST37 / steel, galvanised / PE
Features & advantages
Stabilisation of the pumping unit
External thread 2", 56 x 4 and 70 x6
To enquire this product, please log in here.
Stainless steel shaft
Impeller
PVC spiral hose
for low-viscosity alkaline solutions
Description:
The hose is suitable for aggressive and non-flammable liquids, but also for food liquids. It is made of PVC with an embedded and galvanised steel wire helix (smooth inside and outside).
Also available in special lengths on request
Nominal diameter: DN 19 / DN 25 / DN 32
Properties & advantages
Operating pressure max. 4.5 - 5 bar
fulfils EU Regulation 10/2011 and 1935/2004.
To enquire this product, please log in here.
Stainless steel shaft
Impeller
Dispensing nozzle PP
for low-viscosity alkaline solutions
Description:
For filling and decanting neutral and aggressive liquids. The body and the valve plug of the dispensing nozzle are made of polypropylene (PP) and are equipped with a protective bracket and two outlet nozzles ( Ø 23 mm and Ø 12mm).
Connection: external thread G 1 1/4"
Features & advantages
Simple adjustment of the volume flow
Safe filling or decanting of the respective liquid
Easy to operate
To enquire this product, please log in here.
Stainless steel shaft
Impeller
IBC traverse
for low-viscosity alkaline solutions
Description:
The IBC lifting beam is used to safely remove and install the pumping units or the double diaphragm pump.
Suitable for drum pumps, B70 progressive cavity pumps and diaphragm pumps
Includes transport straps for lifting vehicles and tensioning hooks for fixing to the container
Features & advantages
Compatible with all standard IBC containers
Material: stainless steel
Clamping hook: galvanised steel
for drum pumps / B70 version, guide sleeve with Ø 55 mm made of plastic
To enquire this product, please log in here.
Stainless steel shaft
Impeller
Hose set alkalis + acids
for low-viscosity alkaline solutions
Description:
The hose set is suitable for aggressive and non-flammable liquids, but also for food liquids. The hose is made of PVC with an embedded and galvanised steel wire helix (smooth inside and outside). The set is used for connection to the pumping station or nozzle.
Also available in special lengths on request
Features & advantages
Nominal diameter DN 19 (3/4")
PP hose connection
Pre-assembled hose connections and hose clamps
To enquire this product, please log in here.
Stainless steel shaft
Impeller
TR3 flow meter (PP)
for low-viscosity alkaline solutions
Description:
Easy to operate, compact design and quick to install on all drum and container pumps: The Lutz TR3 flow meter in PP or PVDF. A handy meter that you can "count on" in any situation. The symmetrical measuring chamber can be used for all flow directions and measures low-viscosity, non-flammable media precisely, quickly and, above all, efficiently.
PP for neutral and aggressive media
Examples of media: glycol, ferric chloride, hydrochloric acid, phosphoric acid, etc.
Two 1.5 V batteries (AAA) replaceable
Features & advantages
Measurement according to the turbine wheel principle
Displays the partial and total quantity
Variable display orientation
Mobile on a drum pump or with nozzle connection
Measuring range from 5 l/min - 120 l/min
Simple battery change
To enquire this product, please log in here.