Peristaltic pump 2.8 litres
*Illustration may differ from the actual product
The 2.8 l/h peristaltic pump is used in water treatment wherever low-pulsation dosing at low delivery pressures is required. Compared to diaphragm dosing pumps, peristaltic pumps are characterised by their insensitivity to gas bubbles in the medium. Typical applications include the dosing of chlorine bleach, hydrogen peroxide and hydrochloric acid, but also the dosing of flocculants or cleaning agents, for example.
Features & advantages
- Flow rate 2.8 l/h, up to 1.5 bar
- Rotor mounted on bearings on both sides
- Spring-loaded pressure rollers
- Hose change without tools
- Mounting on profile rail
- Drainage connection
| MATCHCODE: | 0110R0028P021A21B |
|---|
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter