Outlet flange
*Illustration may differ from the actual product
Description:
The outlet flange is used to connect individual components to the B50 centrifugal immersion pump. The flange includes the necessary seals.
- Special connections are available on request
Properties & advantages
- Material: PP
- Nominal diameter: DN 40
- Diameter: 150 mm.
| Accessories group: | Connections |
|---|---|
| Product group: | Kreiselpumpen / Zentrfiugalpumpen |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter