Niro pumping station
Niro
Rotor
*Illustration may differ from the actual product
Available, delivery time: 4 days
Product number:
0102-510
Product information "Niro pumping station"
Description:
The Lutz pumping unit (Niro) is suitable for low-viscosity, oil-based lubricants, cold cleaners and plasticisers. With the appropriate motor, it is suitable for medium to large filling quantities. Depending on requirements, the pumping station can be operated with the B2 Vario electric motor or the B2 Battery version.
- Examples of media: Lubricants (oil-based), cold cleaners, plasticisers
- For dispensing small quantities from hobbocks, canisters and drums
- Suitable for motor B2 Vario and B2 Battery
Features & advantages
- No lubricants and therefore no contamination of the pumped medium
- Optimised drum emptying
- Maintenance without special tools
- Universally resistant shaft bearing made of ETFE/PTFE
- Sealless design (DL) conditionally dry-running safe
| Conveyor wheel (material): | ETFE (ethylene-tetrafluorethylene copolymer) |
|---|---|
| Conveyor wheel shape / drive type: | Axial-flow rotor |
| Delivery head (up to max. mWS)*: | 8 |
| Delivery rate (up to max. l/min)*: | 80 |
| Density (up to kg/dm³): | 1.6 |
| Drive shaft (material): | Stainless steel (1.4571) |
| Immersion depth (mm): | up to 500 mm |
| Immersion tube diameter (max. mm): | 32 |
| Mechanical seal (material): | no seals in contact with the medium |
| Pumped liquid temperature (max °C): | 90 |
| Pumping unit material (material): | Niro (Edelstahl) |
| Seal type: | Sealless (SL) |
| Static seal (material): | no seals in contact with the medium |
| Thread (inch) external: | 1" |
| Type: | Niro 28-R-DL |
| Viscosity (up to max. mPas)*: | 400 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Accessory Items
Niro
Rotor
TR3 flow meter (PVDF)
Suitable for B2 Vario and B2 Battery
Description:
Easy to operate, compact design and quick to install on all drum and container pumps: The Lutz TR3 flow meter in PP or PVDF. A handy meter that you can "count on" in any situation. The symmetrical measuring chamber can be used for all flow directions and measures low-viscosity, non-flammable media precisely, quickly and, above all, efficiently.
PVDF for highly aggressive liquids
Examples of media: Chlorine bleach, nitric acid, sulphuric acid, ...
Two 1.5 V batteries (AAA) replaceable
Features & advantages
Measurement according to the turbine wheel principle
Displays the partial and total quantity
Variable display orientation
Mobile on a drum pump or with nozzle connection
Measuring range from 5 l/min - 120 l/min
Simple battery change
Niro
Rotor
Suspension device
Suitable for B2 Vario and B2 Battery
Description:
The suspension device is used to safely store the B2 Vario drum and laboratory pump. This protects the pumps and increases their utility value at the same time.
Precisely adapted to the B2 Vario drum pump
Features & advantages
Increases the utility value
Protection against the pumping unit or drum pump falling down
Niro
Rotor
Hose connection
Suitable for B2 Vario and B2 Battery
Description:
The hose connection connects the delivery hoses to the pumping station, the double diaphragm pumps or the dispensing nozzle. When using a double diaphragm pump, a suitable reducing nipple must be used in addition to the hose connection
Special connections are available on request
Features & advantages
Nominal sizes: DN 13 / DN 19 / DN 25 / DN 32
Materials PP / PVDF / aluminium / stainless steel / HC
Niro
Rotor
Hose integration
Suitable for B2 Vario and B2 Battery
Description:
The hose connection ensures a good conductive transition between the hose and the pumping station. The use of conductive hoses is mandatory in potentially explosive atmospheres. The ohmic resistance between the fittings must be less than106 ohms.
For drum and container pumps
Properties & advantages
Made of stainless steel (1.4571)
For mineral oil hoses DN 19 / DN 25 / DN 32
Niro
Rotor
PVC spiral hose
Suitable for B2 Vario and B2 Battery
Description:
The hose is suitable for aggressive and non-flammable liquids, but also for food liquids. It is made of PVC with an embedded and galvanised steel wire helix (smooth inside and outside).
Also available in special lengths on request
Nominal diameter: DN 19 / DN 25 / DN 32
Properties & advantages
Operating pressure max. 4.5 - 5 bar
fulfils EU Regulation 10/2011 and 1935/2004.
Niro
Rotor
TR3 flow meter (PP)
Suitable for B2 Vario and B2 Battery
Description:
Easy to operate, compact design and quick to install on all drum and container pumps: The Lutz TR3 flow meter in PP or PVDF. A handy meter that you can "count on" in any situation. The symmetrical measuring chamber can be used for all flow directions and measures low-viscosity, non-flammable media precisely, quickly and, above all, efficiently.
PP for neutral and aggressive media
Examples of media: glycol, ferric chloride, hydrochloric acid, phosphoric acid, etc.
Two 1.5 V batteries (AAA) replaceable
Features & advantages
Measurement according to the turbine wheel principle
Displays the partial and total quantity
Variable display orientation
Mobile on a drum pump or with nozzle connection
Measuring range from 5 l/min - 120 l/min
Simple battery change
Niro
Rotor
Lutz tap valve PP
Suitable for B2 Vario and B2 Battery
Description:
For filling and decanting neutral and aggressive liquids. The liquid flow can be easily adjusted using a screw cap. The body of the dispensing valve is made of polypropylene (PP) and has a suspension bracket. The valve is sealed using an FPM seal.
The outlet spout has a diameter of 12 mm
Features & advantages
Connection: hose nozzle DN 19 (3/4")
Simple adjustment of the flow rate
Dispensing valve made of polypropylene (PP)
Niro
Rotor
Dispensing nozzle Niro
Suitable for B2 Vario and B2 Battery
Description:
For filling and transferring liquids in the food and pharmaceutical industries as well as flammable and highly flammable liquids. The body and valve plug of the dispensing nozzle are made of stainless steel (1.4571) and are equipped with a protective bracket and a swivel coupling.
EPDM seal available on request at an extra charge
Connection: external thread G 1 1/4"
Features & advantages
For pumping in potentially explosive environments
Simple adjustment of the volume flow
Easy to operate
Safe filling or transferring of the respective liquid
Rotary coupling ensures tightness at high pressure
Niro
Rotor
Universal chemical hose
Suitable for B2 Vario and B2 Battery
Description:
The hose is suitable for pure chemicals, cosmetics, photographic chemicals, paints and adhesives, detergents and cleaning agents, hygiene products, as well as food and luxury foods. It is FDA and USP Class VI compliant and is electrically conductive so that it can also be used in potentially explosive environments.
Also available in special lengths on request
Nominal width: DN 13 / DN 19 / DN 25 / DN 32 / DN 38 / DN 50
Features & advantages
Operating pressure up to max. 16 bar
Colour coding: "blue/white/blue".
Complies with EU regulations 10/2011 and 1935/2004
Underpressure max 0.9 bar
Niro
Rotor
IBC traverse
Suitable for B2 Vario and B2 Battery
Description:
The IBC lifting beam is used to safely remove and install the pumping units or the double diaphragm pump.
Suitable for drum pumps, B70 progressive cavity pumps and diaphragm pumps
Includes transport straps for lifting vehicles and tensioning hooks for fixing to the container
Features & advantages
Compatible with all standard IBC containers
Material: stainless steel
Clamping hook: galvanised steel
for drum pumps / B70 version, guide sleeve with Ø 55 mm made of plastic