Skip to main content

Niro pumping station for residual emptying

Product information "Niro pumping station for residual emptying"

Description:

The Lutz pumping station for residual emptying (stainless steel) is suitable for low-viscosity, flammable and explosive liquids. Depending on the application, various motors are available that you can combine with the pumping station at any time. This gives you flexibility at all times and saves important resources.

  • Also available in special immersion depths from 200 - 2500 mm
  • Pumping unit equipped with Lutz Original handwheel
  • Suitable for emptying drums of alternative fuels, oils and flammable liquids

Features & advantages

  • Optionally with electric or compressed air drive
  • No lubricants and therefore no contamination of the pumped liquid by lubricants
  • Optimised drum emptying with a residual quantity of approx. 0.1 litre
  • No leaks if the pumping station is tilted or moved
  • Maximum product utilisation with reduced barrel cleaning and disposal costs
  • Sealing module of the mechanical seal pump (GLRD) can be replaced
Bearing (material): Edelkohle
Certification: ATEX Richtlinie (ATEX Richtlinie 2014/34/EU)
Conveyor wheel (material): ETFE (ethylene-tetrafluorethylene copolymer)
Conveyor wheel shape / drive type: Radial-flow impeller
Delivery head (up to max. mWS)*: 22
Delivery rate (up to max. l/min)*: 78
Density (up to kg/dm³): 1.9
Drive shaft (material): Stainless steel (1.4571)
Explosion protection: Yes
Immersion depth (mm): from 500 mm
Immersion tube diameter (max. mm): 41
Mechanical seal (material): Carbon, ceramic, PTFE, HC-4 (2.4610), stainless steel (1.4571)
Pumped liquid temperature (max °C): 100
Pumping unit material (material): Niro (Edelstahl)
Seal type: mechanical seal (MS)
Static seal (material): FEP coated
Thread (inch) external: 1 1/4"
Type: RE Niro 41-L-GLRD
Viscosity (up to max. mPas)*: 950

* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Accessory Items

slide 7 to 11 of 13

Accessory Items

slide 1 to 2 of 2