Niro pumping station for residual discharge - PURE
*Illustration may differ from the actual product
Description:
The Lutz PURE pumping station for residual emptying (stainless steel) is suitable for aqueous and fatty foodstuffs. Depending on the application, various motors are available that you can combine with the pumping station at any time. This gives you flexibility at all times and saves important resources.
- Also available in special immersion depths from 200 - 2500 mm
- Pumping unit equipped with Lutz Original handwheel
- for emptying drums for foodstuffs containing alcohol, cosmetics and pharmaceutical products as well as flammable cleaning agents
Features & advantages
- Physiologically safe design
- Food-safe connections
- Optimised drum emptying with a residual quantity of approx. 0.1 litre
- Maximum product utilisation with reduced drum cleaning and disposal costs
- approved according to FDA and Regulation (EC) 1935/2004
- approved according to ATEX Directive 2014/34/EU, category 1/2
| Bearing (material): | Edelkohle |
|---|---|
| Certification: | ATEX Richtlinie (ATEX Richtlinie 2014/34/EU), FDA-compliant, Verordnung (EG) 1935/2004 |
| Connection: | Tri-Clamp |
| Conveyor wheel (material): | ETFE (ethylene-tetrafluorethylene copolymer) |
| Conveyor wheel shape / drive type: | Radial-flow impeller |
| Delivery head (up to max. mWS)*: | 22 |
| Delivery rate (up to max. l/min)*: | 78 |
| Density (up to kg/dm³): | 1.9 |
| Drive shaft (material): | Edelstahl (1.4571) |
| Explosion protection: | Yes |
| Immersion depth (mm): | from 500 mm, from 1000 mm, from 1500 mm |
| Mechanical seal (material): | Kohle, Keramik, PTFE, HC-4 (2.4610), Edelstahl (1.4571) |
| Pumped liquid temperature (max °C): | 100 |
| Pumping unit material (material): | Niro (Edelstahl) |
| Seal type: | Gleitringdichtung EPDM (GLRD), Gleitringdichtung FPM (GLRD) |
| Static seal (material): | FPM (fluororubber), PTFE (Polytetrafluorethen) |
| Tauchrohrdurchmesser (max. mm): | 41 |
| Tri-Clamp connection (DN): | 32 |
| Typ: | RE Niro 41-L-GLRD |
| Viscosity (up to max. mPas)*: | 950 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Accessory Items
To enquire this product, please log in here.
To enquire this product, please log in here.
To enquire this product, please log in here.