Niro pumping station for mixing and pumping - PURE
*Illustration may differ from the actual product
Description:
The Lutz pumping unit for mixing and pumping (stainless steel) PURE is suitable for aqueous and fatty foods. Depending on the application, various motors are available which can be combined with the pumping unit at any time. This gives you flexibility at all times and saves important resources.
- Also available in special immersion depths from 200 - 2500 mm
- Pumping unit equipped with Lutz Original handwheel
- for mixing and pumping alcoholic foodstuffs, cosmetics and pharmaceutical products as well as flammable cleaning agents
Properties & advantages
- Physiologically safe design
- Food-safe connections
- High mixing and conveying capacity for thorough homogenisation
- two functions (pumping and mixing) in one device
- Approved according to FDA and Regulation (EC) 1935/2004
- Approved in accordance with ATEX Directive 2014/34/EU, category 1/2
| Bearing (material): | Edelkohle |
|---|---|
| Certification: | ATEX Richtlinie (ATEX Richtlinie 2014/34/EU), FDA-compliant, Verordnung (EG) 1935/2004 |
| Connection: | Tri-Clamp |
| Conveyor wheel (material): | ETFE (ethylene-tetrafluorethylene copolymer) |
| Conveyor wheel shape / drive type: | Axial-flow rotor |
| Delivery head (up to max. mWS)*: | 14,5 |
| Delivery rate (up to max. l/min)*: | 216 |
| Density (up to kg/dm³): | 1.4 |
| Drive shaft (material): | Stainless steel (1.4571) |
| Explosion protection: | Yes |
| Immersion depth (mm): | from 1000 mm |
| Immersion tube diameter (max. mm): | 41 |
| Mechanical seal (material): | Carbon, ceramic, PTFE, HC-4 (2.4610), stainless steel (1.4571) |
| Pumped liquid temperature (max °C): | 100 |
| Pumping unit material (material): | Niro (Edelstahl) |
| Seal type: | Mechanical seal FPM (GLRD) |
| Static seal (material): | FPM (fluororubber), PTFE (polytetrafluoroethene) |
| Tri-Clamp connection (DN): | 32 |
| Viscosity (up to max. mPas)*: | 650 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Accessory Items
Accessory Items
