Mineral oil hose
*Illustration may differ from the actual product
Description:
The hose is suitable for mineral oil products of all types and super up to 50% aromatics and methanol content. The inner rubber is made of NBR and the outer rubber of either CR (chloroprene) or NBR. The hose is electrically conductive so that it can also be used in potentially explosive environments.
- Also available in special lengths on request
- Nominal width: DN 13 / DN 19 / DN 25 / DN 32 / DN 38 / DN 50
Features & advantages
- Operating pressure up to max. 16 bar
- Colour coding: "Yellow"
| Accessories group: | Hoses / Discharge spouts / Suction pipe |
|---|---|
| Certification: | ATEX Richtlinie (ATEX Richtlinie 2014/34/EU) |
| Explosion protection: | Yes |
| Product group: | Exzenterschneckenpumpen, Fasspumpen / Containerpumpen, Membranpumpen |
| Pumped liquid temperature (max °C): | 65 , 90 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Accessory Items
To enquire this product, please log in here.
To enquire this product, please log in here.