MEMDOS SMART LD
*Illustration may differ from the actual product
MEMDOS SMART LD - precision that inspires!
The compact stepper motor diaphragm dosing pump, paired with its intelligent drive concept, combines the size advantages of a solenoid diaphragm dosing pump with the precision of a motorised diaphragm dosing pump. The MEMDOS SMART LD series is available in six performance ranges. The drive of the MEMDOS SMART LD is fully adjustable. The dosing capacity can be adjusted by manually setting the stroke frequency or using external control contacts.
Features & advantages
- Capacity range 2.4 - 30.7 l/h, up to 20 bar
- Power supply 100 - 250 V, 50/60 Hz, protection class IP65, power consumption 25 W
- Microprocessor-controlled drive
- Integrated dosing head ventilation (only MEMDOS SMART LD 2, LD 5 and LD 10 with plastic dosing head)
- Suitable for wall and floor mounting
- Material versions PVC, PP, PVDF and stainless steel
- Stroke frequency precisely adjustable with keypad
- Graphic display
- Pulse input (overshoot and undershoot)
- Level input with pre- and main alarm
- Enable input for external start/stop
- Calculation wizard for pulse operation available online
| MATCHCODE: | 0101D010010AV011AD0D0V1ZV1Z0 |
|---|---|
| Funktionen:: | Hubfrequenz präzise mit Tastatur einstellbar |
| Produkt:: | MEMDOS SMART |
| Typ:: | LD |
| Fördermenge bei max. Druck:: | 10,7 l/h |
| Förderdruck max.:: | 10 bar |
| Werkstoff Dosierkopf und Ventile:: | PVDF |
| Leistungsverstellung:: | Hubfrequenz einstellbar 0 - 150 Hübe/min |
| Steuereinheit:: | 100 - 250 V, 50/60 Hz |
| Elektrischer Anschluss:: | 1,8 m Netzkabel mit Stecker, Europa [bei 230 V AC] |
| Sauganschluss:: | Schlauchklemm-Anschluss-Set 4/6, 6/9 und 6/12 |
| Saugventil DN4:: | Doppelkugel PTFE/PVDF/FPM [Kugel/Sitz/Dichtung] |
| Druckanschluss:: | Schlauchklemm-Anschluss-Set 4/6, 6/9 und 6/12 |
| Druckventil DN4:: | Doppelkugel PTFE/PVDF/FPM [Kugel/Sitz/Dichtung] |
| Funktion-2: | Grafikdisplay |
| Funktion-3: | Impulseingang [Über- und Untersetzung] |
| Funktion-4: | Niveaueingang mit Vor- und Hauptalarm |
| Funktion-5: | Freigabeeingang für extern Start/Stop |
| Werkstoff Sauganschluss:: | PVDF |
| Werkstoff Druckanschluss:: | PVDF |
| Dosierkopfanordnung:: | Bodenmontage |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter