MEMDOS SMART LB
*Illustration may differ from the actual product
MEMDOS SMART LB - precision that inspires!
The compact stepper motor diaphragm dosing pump, paired with its intelligent drive concept, combines the size advantages of a solenoid diaphragm dosing pump with the precision of a motorised diaphragm dosing pump. The MEMDOS SMART LB series is available in six performance ranges. The drive of the MEMDOS SMART LB is fully adjustable. The stroke frequency can be infinitely adjusted manually from 0 - 100 % to adjust the dosing capacity.
Features & advantages
- Capacity range 2.4 - 30.7 l/h, up to 20 bar
- Power supply 100 - 250 V, 50/60 Hz, protection class IP65, power consumption 25 W
- Microprocessor-controlled drive
- Integrated dosing head ventilation (only MEMDOS SMART LB 2, LB 5 and LB 10 with plastic dosing head)
- Suitable for wall and floor mounting
- Material versions PVC, PP, PVDF and stainless steel
- Stroke frequency continuously adjustable from 0 - 100
- Enable input for external start/stop
| MATCHCODE: | 0101M002020AP011A2K2KP1BP1B0 |
|---|---|
| Funktionen:: | Freigabeeingang für extern Start/Stop |
| Produkt:: | MEMDOS SMART |
| Typ:: | LB |
| Fördermenge bei max. Druck:: | 2,4 l/h |
| Förderdruck max.:: | 20 bar |
| Werkstoff Dosierkopf und Ventile:: | PP |
| Leistungsverstellung:: | Hubfrequenz einstellbar 0 - 150 Hübe/min |
| Steuereinheit:: | 100 - 250 V, 50/60 Hz |
| Elektrischer Anschluss:: | 1,8 m Netzkabel mit Stecker, Europa [bei 230 V AC] |
| Sauganschluss:: | Schlauchklemm-Anschluss 4/6 |
| Saugventil DN3:: | Doppelkugel Keramik/Keramik/FPM [Kugel/Sitz/Dichtung] |
| Druckanschluss:: | Schlauchklemm-Anschluss 4/6 |
| Druckventil DN3:: | Doppelkugel Keramik/Keramik/FPM [Kugel/Sitz/Dichtung] |
| Werkstoff Sauganschluss:: | PP |
| Werkstoff Druckanschluss:: | PP |
| Dosierkopfanordnung:: | Bodenmontage |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter