MEMDOS LA
*Illustration may differ from the actual product
MEMDOS LA - technology that makes waves!
The MEMDOS LA motorised diaphragm dosing pump sets standards with its robust and sophisticated drive concept and ease of operation. The MEMDOS LA series is available in two sizes and covers a performance range of 4 - 1020 l/h. Thanks to a robust tappet drive with manual or automatic capacity adjustment via external current signals, the pumped media, e.g. Acids, alkalis, precipitants and flocculants, reliably and precisely dosed.
Properties & advantages
- Output range 4 - 1020 l/h, up to 16 bar
- Power supply 120 V, 208 V or 230 V, 50/60 Hz
- Material versions PVC, PP, PVDF and stainless steel
- Stroke frequency manually adjustable via potentiometer
- Enable input for external start/stop
- Analogue input 0/4 - 20 mA
- Level input with one switching point
- Analogue output 0/4 - 20 mA
- Alarm relay output
- Stroke feedback output
- Double diaphragm system (optional)
| MATCHCODE: | 0104A0010PF11A2K2KP1EP1E |
|---|---|
| Funktionen:: | Hubfrequenz mittels Potenziometer 0 - 100 % einstellbar |
| Produkt:: | MEMDOS |
| Typ:: | LA |
| Fördermenge:: | 14 l/h bei 50/60 Hz gegen max. 12 bar |
| Werkstoff Dosierkopf und Ventile:: | PP |
| Elektrischer Anschluss:: | 1,8 m Netzkabel mit Stecker, Europa [bei 230 V AC] |
| Elektrischer Antrieb:: | 230 V 1ph 50/60 Hz 0,37 kW mit Motor 0,18 kW |
| Sauganschluss:: | Schlauchklemm-Anschluss 6/9 |
| Saugventil:: | DN4 Doppelkugel Keramik/PVDF/FPM [Kugel/Sitz/Dichtung] |
| Druckanschluss:: | Schlauchklemm-Anschluss 6/9 |
| Druckventil:: | DN4 Doppelkugel Keramik/PVDF/FPM [Kugel/Sitz/Dichtung] |
| Funktion-2: | Signal-LED's für Status, Betriebs- und Fehleranzeige |
| Funktion-3: | Analogeingang 0/4 ═ 20 mA |
| Funktion-4: | Niveaueingang mit Hauptalarm |
| Funktion-5: | Freigabeeingang für extern Start/Stop |
| Funktion-9: | Hub-Rückmeldeausgang |
| Funktion-10: | Alarmrelaisausgang |
| Funktion-13: | Analogausgang 0/4 ═ 20 mA |
| Werkstoff Sauganschluss:: | PP |
| Werkstoff Druckanschluss:: | PP |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter