Lutz tap valve PP
*Illustration may differ from the actual product
Available, delivery time: 4 days
Description:
For filling and decanting neutral and aggressive liquids. The liquid flow can be easily adjusted using a screw cap. The body of the dispensing valve is made of polypropylene (PP) and has a suspension bracket. The valve is sealed using an FPM seal.
- The outlet spout has a diameter of 12 mm
Features & advantages
- Connection: hose nozzle DN 19 (3/4")
- Simple adjustment of the flow rate
- Dispensing valve made of polypropylene (PP)
| Accessories group: | Nozzles, Valves / Ball valves |
|---|---|
| Delivery rate (up to max. l/min)*: | 40 |
| Housing (material): | Polypropylene glass fibre reinforced (PP) |
| Operating pressure (max. bar): | 1 |
| Product group: | Drum pumps / container pumps |
| Pumped liquid temperature (max °C): | 50 |
| Static seal (material): | FPM (fluororubber) |
| Type: | Dispensing valve PP |
| Viscosity (up to max. mPas)*: | 300 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter