Hose set alkalis + acids
*Illustration may differ from the actual product
Description:
The hose set is suitable for aggressive and non-flammable liquids, but also for food liquids. The hose is made of PVC with an embedded and galvanised steel wire helix (smooth inside and outside). The set is used for connection to the pumping station or nozzle.
- Also available in special lengths on request
Features & advantages
- Nominal diameter DN 19 (3/4")
- PP hose connection
- Pre-assembled hose connections and hose clamps
| Accessories group: | Hoses / Discharge spouts / Suction pipe |
|---|---|
| Product group: | Exzenterschneckenpumpen, Fasspumpen / Containerpumpen, Membranpumpen |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Accessory Items
To enquire this product, please log in here.
To enquire this product, please log in here.
To enquire this product, please log in here.
To enquire this product, please log in here.