Hose integration
*Illustration may differ from the actual product
Description:
The hose connector is used as a safety connector for mineral oil hoses, solvent hoses and universal chemical hoses with different connection threads.
- For double diaphragm pumps
Properties & advantages
- Made of brass / stainless steel (1.4571)
- For hose with nominal diameter DN 13 / DN 19
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter