Hose integration
*Illustration may differ from the actual product
Description:
For connecting conductive delivery hoses to the pump, nozzle/outlet elbow or Tri-Clamp fittings in potentially explosive atmospheres. The hose connection ensures a good conductive transition between the conductive hose and pump/fitting. The ohmic resistance between the fittings must be less than106 ohms. The hose connection consists of a hose connector, a clamping shell, a locking clip and a seal.
- For progressing cavity pumps
Properties & advantages
- Stainless steel materials (1.4404)
- Only suitable in conjunction with the universal chemical hose
- in accordance with the DIN EN 12 115 standard
| Accessories group: | Hose connection / Hose clips |
|---|---|
| Product group: | Exzenterschneckenpumpen, Fasspumpen / Containerpumpen |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter