Hose connection
*Illustration may differ from the actual product
Description:
The hose connection with Tri-Clamp is required for connecting the delivery hose to the B70 progressive cavity pump, the discharge elbow or the Tri-Clamp fittings (consisting of hose nozzle, locking clamp and seal).
- For progressing cavity pumps
Properties & advantages
- Material stainless steel (1.4404)
- For hoses with nominal diameter DN 38 / DN 50
| Accessories group: | Hose connection / Hose clips |
|---|---|
| Product group: | Exzenterschneckenpumpen |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter