Hose clamp DN 19 (3/4")
*Illustration may differ from the actual product
Description:
The hose clamp is made of stainless steel and is suitable for attaching delivery hoses to the pump outlet or accessories.
- The nominal diameter of the clamp corresponds to DN19 (3/4")
Features & advantages
- Clamping range from 28.0 - 31.0 mm
| Accessories group: | Hose connection / Hose clips |
|---|---|
| Product group: | Fasspumpen / Containerpumpen |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter