Foot strainer
*Illustration may differ from the actual product
Description:
The foot strainer can be used for PP, PVDF, aluminium and stainless steel pumping units. By attaching the strainer to the pump foot, coarse impurities can be kept away from important components such as the drive (rotor, impeller).
- For attaching to the pump base and the suction pipe with Ø 41 mm
Features & advantages
- Prevents contamination in the pumping station by filtering it out
- Outer pipe diameter 55 mm
- Mesh size 20 x 2 mm
| Accessories group: | Adapter / Foot strainers |
|---|---|
| Certification: | , ATEX Richtlinie (ATEX Richtlinie 2014/34/EU) |
| Product group: | Fasspumpen / Containerpumpen, Membranpumpen |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter