Flange connection
*Illustration may differ from the actual product
Description:
The flange connection is required to connect the ST 10 / SL10 flow meters to a pipework system. To connect the LM10 / UN 10 flow meters to a pipework system, the connection with the conductive flange connection in the PPS version is required.
- Materials PPO / PPS
Properties & advantages
- Flange connection: DN 20 / PN 10
- Seals: FPM and FPM - FEP
| Accessories group: | Connections |
|---|---|
| Product group: | Durchflussmesser |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter