FEDOS E
*Illustration may differ from the actual product
FEDOS E - the classic piston metering pump!
The FEDOS E is used when no control unit is required for constant dosing. The motor is connected directly to the terminal box. Rotary and alternating current motors are available for the FEDOS E. To adjust the dosing capacity, the stroke length can be adjusted mechanically or the speed of the three-phase motor can be controlled with a separate frequency converter. An electric actuator is optionally available to control the stroke length.
Features & benefits
- Suitable for precise mixing tasks
- Capacity range 0.17 to 31.5 l/h, up to 100 bar
- Low dependence on back pressure
- Linear change in dosing quantity with the stroke length
- Automatic stroke length adjustment (optional)
- plunger drive with easy-to-operate capacity adjustment
- Suitable for frequency converter operation
- Optional flushing lantern
| MATCHCODE: | 0107E0003S11MAA003S3SS5AS5A |
|---|---|
| Produkt:: | FEDOS |
| Typ:: | E |
| Fördermenge:: | 0,31 l/h bei 50 Hz - 0,37 l/h bei 60 Hz |
| Werkstoff Dosierkopf und Ventile:: | Edelstahl |
| zulässiger Druck:: | 40 bar |
| Leistungsverstellung:: | Hublänge manuell einstellbar 0 - 100 % |
| Werkstoff Kolben:: | 1.4571 |
| Elektrischer Antrieb:: | 400 V 3ph 50 Hz 0,05 kW - 460 V 3ph 60 Hz 0,05 kW |
| Kolbenabdichtung:: | Packungsring PTFE-Seide bis max. 40 bar |
| Sauganschluss:: | Gewinde-Anschluss G1/4 innen |
| Elektrische Optionen:: | ohne |
| Druckanschluss:: | Gewinde-Anschluss G1/4 innen |
| Saugventil DN3/4:: | Doppelkugel 1.4401/1.4571+Keramik/PTFE [Kugel+Sitz/Dichtung] |
| Werkstoff Sauganschluss:: | Edelstahl |
| Druckventil DN3/4:: | Doppelkugel 1.4401/1.4571+Keramik/PTFE [Kugel+Sitz/Dichtung] |
| Werkstoff Druckanschluss:: | Edelstahl |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter