Emission protection barrel adapter
Description:
Prevents hazardous gases from escaping from the drum when using a drum pump. This protects the operator, the environment and the drive motor from hazardous gases. Two ventilation valves ensure pressure equalisation between the inside of the drum and the surrounding atmosphere.
- Optionally with corresponding ventilation valve and container lid
- Seals: FPM (alt. EPDM of FEP)
- Special threads (Tri-Sure 2", BCS 56 x 4 AG, Mauser 2", BCS 70 x 6 AG, M 64 x 4 AG) are available on request
Features & advantages
- Connection for vapour return line: G 3/8"
- Screw-in thread: G 2" AG
- Quick pressure equalisation through vent valves
- Simple installation
- Secure stability thanks to spring mechanism
| Accessories group: | Adapter / Foot strainers |
|---|---|
| Product group: | Fasspumpen / Containerpumpen |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter