Drum pump for residual emptying - Solvent
Available, delivery time: 5 days
Description:
The drum pump is suitable for low-viscosity, flammable and combustible liquids and hydrocarbons. Perfectly suited for the removal or decanting of explosive media and solvents.
- Optionally available with Ex plug
- Pumping unit equipped with Lutz original handwheel
- Suitable for emptying drums of alternative fuels, oils and flammable liquids
Features & advantages
- Optionally with electric or compressed air drive
- No lubricants and therefore no contamination of the pumped liquid by lubricants
- optimised drum emptying with a residual quantity of approx. 0.1 litre
- No leaks if the pumping station is tilted or moved
- Maximum product utilisation with reduced drum cleaning and disposal costs
- Approved in accordance with ATEX Directive 2014/34/EU, category 1/2
Ausführung/Ausstattung: | with undervoltage release |
---|---|
Bearing (material): | Edelkohle |
Conveyor wheel (material): | ETFE (ethylene-tetrafluorethylene copolymer) |
Conveyor wheel shape / drive type: | Radial-flow impeller |
Delivery head (up to max. mWS)*: | 14 |
Delivery rate (up to max. l/min)*: | 77 |
Density (up to kg/dm³): | 1.6 |
Drive shaft (material): | Edelstahl (1.4571) |
Drive type: | Electric |
Explosion protection: | Yes |
Frequency (Hz): | 50 |
Gewinde (Zoll) außen: | 1 1/4" |
Immersion depth (mm): | from 1000 mm |
Mechanical seal (material): | Kohle, Keramik, PTFE, HC-4 (2.4610), Edelstahl (1.4571) |
Operating pressure (max. bar): | lower than 6 bar |
Power (W): | 460 |
Protection class: | IP54 |
Pumped liquid temperature (max °C): | 100 |
Pumping unit material (material): | Niro (Edelstahl) |
Seal type: | mechanical seal (MS) |
Static seal (material): | FEP ummantelt |
Suitable media: | Aceton, Ameisensäure, Benzin, Butanol, Butylacetat, Essigsäure, Ethanol, Isopropanol, Kerosin, Methanol, Nikotin, Petroleum, Styrol, Toluol, Äththylacetat |
Tauchrohrdurchmesser (max. mm): | 41 |
Viscosity (up to max. mPas)*: | 500 |
Voltage (V): | 230 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter