Double diaphragm pump DMP model 3/8" plastic
*Illustration may differ from the actual product
Description:
The double diaphragm pump is suitable for pumping small quantities, in laboratories and for occasional filling operations
- Typical applications: Chemical circulation and feeding, liquids with solid particles such as paints and varnishes, electroplating liquids, etc.
- integrated silencer up to model size DMP 1"
- highly resistant TFM (PTFE) diaphragms (modified PTFE)
Features & advantages
- High hydraulic performance
- Maintenance-optimised design and easy installation
- Self-priming (even when dry)
- Reinforced elastomers and thermoplastic diaphragm
- Absolutely oil-free
- blockage-free operation
| Air pressure (max. bar): | 8 |
|---|---|
| Certification: | , ATEX Richtlinie (ATEX Richtlinie 2014/34/EU) |
| Connection: | Gewinde |
| Delivery head (up to max. mWS)*: | 80 |
| Delivery rate (up to max. l/min)*: | 26 |
| Displacement per cycle (in cm³): | 70 |
| Doppelmembranpumpen (Werkstoff): | non - metallic |
| Explosion protection: | No, Yes |
| Housing (material): | Polyvinylidene fluoride carbon fibre reinforced (PVDF) |
| Luftdruck Anlauf (min. bar): | 2 |
| Lufteinlass ( Ø mm): | 6 |
| Membranes (material): | TPV (EPDM-PP) + TFM (PTFE) (EPDM/PP-Compound + Modifiziertes Polytetrafluorethylen) |
| Mittelblock (Werkstoff): | Polypropylene carbon fibre reinforced (PP) |
| Pressure connection (inch) inside: | 3/8" |
| Pumped liquid temperature (max °C): | 90 |
| Schalldruckpegel ( in dB(A)): | 72 |
| Seals (material): | PTFE (polyvinylidene fluoride) |
| Size (inch): | 3/8" |
| Solids (max. ø mm): | 3 |
| Suction height dry (up to max. mWS*): | 4 |
| Suction nozzle (inch) inside: | 3/8" |
| Typ: | DMP 3/8" KNTC Ex PVDF/PTFE, DMP 3/8" KNT PVDF/PTFE |
| Valve ball (material): | PTFE (Polytetrafluorethylen) |
| Valve seat (material): | PVDF (polyvinylidene fluoride) |
| Verdrängung pro Kammer ( in cm³): | 35 |
| Viscosity (up to max. mPas)*: | 3500 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Accessory Items
To enquire this product, please log in here.
To enquire this product, please log in here.
To enquire this product, please log in here.
To enquire this product, please log in here.
Accessory Items
To enquire this product, please log in here.
To enquire this product, please log in here.
To enquire this product, please log in here.