Double diaphragm pump DMP model 1/2" PURE
*Illustration may differ from the actual product
Available, delivery time: 2-5 days
Description:
The double diaphragm pump is suitable for the food and pharmaceutical sectors as well as for emptying drums, IBCs and tanks.
- Typical applications: liquid foodstuffs and luxury foods, active pharmaceutical ingredients and cosmetic products
- Integrated silencer up to model size DMP 1"
- FDA-compliant
Features & benefits
- High hydraulic performance
- Maintenance-optimised design and easy installation
- Self-priming (even when dry)
- Ice-free air system
- Blockage-free operation
- Food-safe connections
| Air inlet (inch) inside: | 1/4" |
|---|---|
| Air pressure (max. bar): | 8 |
| Certification: | FDA-compliant |
| Connection: | Tri-Clamp |
| Delivery head (up to max. mWS)*: | 80 |
| Delivery rate (up to max. l/min)*: | 76 |
| Displacement per cycle (in cm³): | 150 |
| Doppelmembranpumpen (Werkstoff): | Metall |
| Housing (material): | Edelstahl 1.4404 (316 L) elektropoliert |
| Luftdruck Anlauf (min. bar): | 2 |
| Membranes (material): | TPV (EPDM-PP) + TFM (PTFE) (EPDM/PP-Compound + Modifiziertes Polytetrafluorethylen) |
| Mittelblock (Werkstoff): | Polypropylene glass fibre reinforced (PP) |
| Pressure connection (inch) inside: | Tri-Clamp 1 |
| Pumped liquid temperature (max °C): | 100 |
| Schalldruckpegel ( in dB(A)): | 75 |
| Seals (material): | PTFE (polyvinylidene fluoride) |
| Size (inch): | 1/2" |
| Solids (max. ø mm): | 3,8 |
| Suction height dry (up to max. mWS*): | 4 |
| Suction nozzle (inch) inside: | Tri-Clamp 1 |
| Typ: | DMP 1/2" SST PURE SS/PTFE |
| Valve ball (material): | PTFE (Polytetrafluorethylen) |
| Valve seat (material): | Stainless steel |
| Verdrängung pro Kammer ( in cm³): | 75 |
| Viscosity (up to max. mPas)*: | 7500 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Accessory Items
To enquire this product, please log in here.
To enquire this product, please log in here.
To enquire this product, please log in here.
To enquire this product, please log in here.
To enquire this product, please log in here.
Accessory Items
To enquire this product, please log in here.
To enquire this product, please log in here.