DMP Niro pumping station for residual emptying
*Illustration may differ from the actual product
Available, delivery time: 4 days
Description:
The Lutz DMP pumping unit for residual emptying (stainless steel) is suitable for low-viscosity, flammable and explosive liquids. The pumping unit can be combined with our 1/2" compressed air double diaphragm pump. This ensures that the liquids are drained and thus conserves important resources.
- Can be combined with the compressed air double diaphragm pump 1/2"
- Suitable for emptying drums of alternative fuels, oils and flammable liquids
Features & advantages
- No lubricants and therefore no contamination of the pumped liquid by lubricants
- Optimised drum emptying with remaining residual quantity of approx. 0.1 litre
- No leaks if the pumping station is tilted or moved
- Maximum product utilisation with reduced barrel cleaning and disposal costs
- Sealing module of the mechanical seal pump (GLRD) can be replaced
| Bearing (material): | Edelkohle |
|---|---|
| Conveyor wheel (material): | ETFE (ethylene-tetrafluorethylene copolymer) |
| Conveyor wheel shape / drive type: | Radial-flow impeller |
| Delivery head (up to max. mWS)*: | 22 |
| Delivery rate (up to max. l/min)*: | 78 |
| Density (up to kg/dm³): | 1.9 |
| Drive shaft (material): | Edelstahl (1.4571) |
| Explosion protection: | Yes |
| Gewinde (Zoll) außen: | 1 1/4" |
| Immersion depth (mm): | from 1500 mm |
| Mechanical seal (material): | Kohle, Keramik, PTFE, HC-4 (2.4610), Edelstahl (1.4571) |
| Pumped liquid temperature (max °C): | 100 |
| Pumping unit material (material): | Niro (Edelstahl) |
| Seal type: | mechanical seal (MS) |
| Static seal (material): | FEP ummantelt |
| Tauchrohrdurchmesser (max. mm): | 41 |
| Typ: | DMP RE Niro 41-L-GLRD |
| Viscosity (up to max. mPas)*: | 950 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.
** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
Accessory Items
To enquire this product, please log in here.